Instruction manual

English

CODE POSSIBLE CAUSE POSSIBLE SOLUTION

Fuse blown, circuit breaker tripped 1. Check fuse box for blown fuse and replace as necessary. Reset circuit

breaker. Do not use a fuse or circuit breaker with higher rating than that

specified for your particular branch circuit.

2. Check for proper fuse. Use only a time delay fuse.

3. Check for low voltage conditions and/or proper extension cord.

4. Disconnect the other electrical appliances from circuit or operate the

compressor on its own branch circuit.

Tank pressure exceeds pressure switch cut-

in pressure

Motor will start automatically when tank pressure drops below cut-in

pressure of pressure switch.