Specifications

DeTOS 7 Administration Manual
22
4.7 Sound
This section allows you to adjust the master volume level for the terminal.
1. From the DeTOS Desktop, select DeTOS → DeTOS Control Panel.
2. Click the Sound icon on the left hand side of the Control Panel, under System.
3. Enter a value between 0 – 100 in the “Volume” field.
4. Press the Apply button to save. Your changes will take place automatically.
5.0 Connections
5.0.1 Adding New Connections
No matter what type of connection you are creating, the first few steps are always the same.
1. From the DeTOS Desktop, select DeTOS → DeTOS Control Panel.
2. Click the icon you wish to create; it is listed under the “Connections” bar, on the left-hand side of the Control
Panel.
3. The main window will split into two separate frames. The top frame will list all existing connections for this
particular type or protocol. To add a new connection, click the plus [ + ] button.
4. You will be prompted to enter a name for this connection. Enter a name for this connection and press the OK
button to continue.
5. The bottom frame will display configuration fields that are specific to the connection type you are creating.
Some connections, like Firefox Web Browser, will only have a couple of fields required for configuration and be
listed on one single form. Connections that have several configuration options associated with them, like RDP
and Citrix, will have their settings grouped and sorted under separate form sections, called “form panels”.
These panels
6. Can be opened and closed by clicking the [ + ] and [ - ] buttons found along the top, right-hand side of
each panel box.
NOTE – The number of form panels will vary, depending on the type of connection you are creating. Click the plus/minus buttons to
expand and collapse these sections.