Specifications

DeTOS 7 Administration Manual
15
Screen Resolution: Select the desired resolution from the dropdown list OR select Auto-detect to
allow DeTOS to automatically choose the best resolution for the attached monitor.
Position:
a.) “Left of” or “Right of” – If your monitors are positioned in a side-by-side arrangement, then you'll
want to specify one of the monitors as being to the “Left of” or “Right of” the opposite monitor.
b.) “Above” or “Below” – If your monitors are positioned in a top and bottom arrangement, then you'll
want to specify one of the monitors as being to the “Above” or “Below” the opposite monitor.
c.) “Clone” – Choosing the Clone option will cause the display to be duplicated on both monitors.
(aka Mirrored)
NOTE – This is the default behavior for dual monitors when powered on for the first time.
d.) “Offset” – When you select the offset option, you will be presented with two additional fields for X
and Y coordinates. For example: “50x50” will cause the display to be positioned 50 pixels left of
and 50 pixels higher above its normal centered state.
Rotation: Select Right to rotate the display clockwise and Left to rotate the screen counter-clockwise.
You can also select Invert to flip the entire display upside down.
Reflection: Select X, Y, or XY values to rotate the screen along the xy plane.
NOTE – The X plane is Horizontal. The Y plane is Vertical.
Once you are finished, press the Apply button and reboot the terminal for the changes to take effect.
4.1.3 A Note about DVI Ports on the TC5 Thin Client
There are two types of DVI ports available on the TC5 thin client. The “DVI-1” port, located towards the bottom of the
unit, is an integrated port that supports both digital and analog signals. You may connect either a DVI or VGA monitor to
this port. The port labeled “DVI-2” is a digital-only port and can only use DVI. You will not be able to connect a VGA
monitor to the DVI-2 port.