Technical data

devolo MicroLink dLAN Software

devolo MicroLink dLAN Highspeed Ethernet

3.1.4 MicroLink EasyClean

Microsoft Internet Explorer stores files in a cache on your hard drive while

you surf the Internet. With MicroLink

EasyClean, you can determine which of

these unwanted files you would like to delete.

3.2 Installing the devolo MicroLink dLAN Software

햲 Put the enclosed devolo product CD in your CD-ROM drive.

햳 From the CD setup, select 'Install MicroLink dLAN Software'. Windows

starts the wizard. Confirm by clicking Next.

햴 Select 'Standard Installation' to install the complete devolo MicroLink

dLAN software package. Then, click Next.

If you would like to choose the software components to be installed yourself,

select 'Custom Installation'. Then, click Next.

햵 Terminate the installation by clicking Finish.

햶 After the installation has been completed successfully, start the devolo

tools by clicking Start  Programs  devolo  MicroLink dLAN

Configuration Wizard, MicroLink

EasyShare, MicroLink Informer

or MicroLink

EasyClean.

3.3 Configuration of the dLAN network using the

MicroLink dLAN Configuration Wizard

Please have the previously noted dLAN adapters security IDs ready. The

MicroLink dLAN Configuration Wizard requires them for configuration of the

network. You will find the security ID on the bottom of the device.

햲 Start the MicroLink dLAN Configuration Wizard under Start  Pro-

grams  devolo  MicroLink dLAN Configuration Wizard.

햳 Confirm with Next. The MicroLink dLAN Configuration Wizard starts the

network analysis and searches for dLAN adapters on your network.

Make sure that all of the dLAN adapters that you want to add to your network

are also connected to the power supply grid. If no active device is connected

to the Ethernet port, a dLAN adapter will go into standby mode after about 15

minutes. It cannot be configured while in standby mode.