Operation Manual

|
Connection and Startup
21
|
devolo MicroLink dLAN Audio
|
EN
3.1.3 Connecting the analog audio output
To receive music from the power supply grid on your stereo system via analog
connections, use a cinch (RCA) cable to connect an analog input of the stereo
system to the analog output of the MicroLink dLAN Audio adapter:
3.1.4 Connecting the digital audio input
To transmit music from your stereo system to the power supply grid using
digital connections, use a cinch (RCA) cable to connect a digital output of the
stereo system to the digital input of the MicroLink dLAN Audio adapter:
If the audio source (the connected device) is set to “Dolby Digital” or “DTS”
output, it must be switched over to the “Stereo” output format.
LR
Digital 'In'