Operation Manual

Installation

devolo MicroLink 56k PCI

햷 When the driver 'PCI Modem Enumerator' has been found, confirm by

clicking Next in order to initiate installation.

햸 In the subsequent dialog box, click Finish.

햹 Windows detects the MicroLink 56k PCI card. Confirm this message with

Next.

햺 Windows offers you two different ways of searching for drivers. Select

the 'Search for the best driver for your device (Recommended)' option and

click Next.

햻 The suitable driver can be found on the devolo product CD. Activate the

'CD-ROM drive' option and deactivate all other boxes.

Confirm with

햽 Confirm the search results with Next. Windows will install the driver.

햾 When the wizard is ready, click Finish.

햿 Windows detects the 'Wave Device for Voice Modem'. Confirm this mes-

sage with Next.

The modem is entered in the Device Manager as 'MicroLink 56k PCI' and as

audio device with the 'Voice Modem Serial Wave Device' hardware compo-

nent to ensure voice functionality.

헀 Windows offers you two different ways of searching for drivers. Select

the 'Search for the best driver for your device (Recommended)' option and

click Next.

헁 The suitable driver can be found on the devolo product CD. Activate the

'CD-ROM drive' option and deactivate all other boxes.

Confirm with

헂 Finally, exit the installation by clicking Finish.

2.3.2 Installation under Windows Me

햲 Restart your computer after inserting the PC card.

햳 Insert the supplied devolo product CD into your CD-ROM drive.

햴 Windows starts the hardware wizard and reports that new hardware has

been detected. The wizard offers you two different ways of searching for