Operation Manual

Appendix

devolo MicroLink 56k Fun II

3 Appendix

3.1 Technical data

This table has detailed information on the MicroLink 56k Fun II for those

interested.

CE conformity

This product meets the requirements of the 1999/5/EG Directive R&TTE and

is designed for connection to public telecommunications networks in the EU

and Switzerland.

MicroLink 56k Fun II

Power supply 230-V/9V

plug

Power consumption

(about)

Transmission phase (online)400 mA typ.

Command phase (offline)300 mA typ.

Dimensions 40 x 90 x 113 mm (height x width x depth), plastic housing

Environment 5..40°C, humidity 0..80%, non condensing

Transmission rates and

protocols

Receive: 56.000–300 bps, asynchronous;

Send: 33.600–300 bps, asynchronous

(V.92, V.90, V.34, V.32bis, V.32, V.22bis, V.22, V.21, V.23)

Error correction V.42

Data compression V.42bis

With V.92: V.42bis and V.44

Command set AT command set according to V.250/V.25ter

Voice mode Voice command set V.253

Fax mode 14.400–2400 bps according to V.17, V.29 and V.27ter;

Fax command set class 1 (TIA/EIA-578) and class 1.0 (T.31)

Dialing method Multifrequency dial

Outside line Via flash key or digit

Bit-rat adaption Automatic according to V.8

Computer interface V.24/RS-232 (max. 230.400 bps including automatic detection)

CE conformity Tested under EN 50022, Class B; EN 55024, EN 60950;

technical requirements in accordance with R&TTE for all Euro-

pean countries and Switzerland