Operation Manual

7
Installing the Home Control Wall Switch
햴 If the device control functions through the Home Control Wall Switch, install the Home Control Wall
Switch where you would like it to be now.
햵 If you fasten the Home Control Wall Switch using the double-sided tape for corners, put this tape
on the four corners of the housing backplate and attach the Home Control Wall Switch to the place
you want it to be.
When mounting the board, make sure that the "TOP with up arrow" marking for the
mounting direction points up so that the switch order 1-2-3-4 is correct (see figure
on the right).
쑗 Attach the desired rocker switch(es) onto the board of the Home Control Wall Switch.
Housing backplate
Frame
Board
Rocker switch
1
34
2
TOP