Operation Manual

Multiple Home Control Smart Metering Plugs cannot be plugged into one another.

To ensure the best possible wireless range for the Home Control Smart Metering Plug, avoid po-

sitioning it behind objects that block the signal (attenuation) and avoid interference

sources. Weak signals due to attenuation can result from furniture, plants and especially metal

objects which are located between the devices. Possible sources of interference include electrical

devices such as a microwave or computer. In such instances, keep your device at least around 50

cm away from the source. The device is designed for indoor use only.

The Home Control Smart Metering Plug shuts off automatically if an overload > 3 kW

occurs. To restore function to the Home Control Smart Metering Plug, unplug it for

around 10 seconds, then plug it in again.

 Select a wall outlet while taking the above factors into consideration, then lay the

Home Control Smart Metering Plug only near this outlet at first.

 If this is the first Home Control device that you are registering, a list of possible devices is displayed auto-

matically when you register the Home Control Central Unit. Select

devolo Home Control Smart Metering Plug. To add a device manually, call up your

Home Control Central Unit and select Devices

 Add device 

devolo Home Control Smart Metering Plug. Continue to follow the instructions to log into your

Home Control Central Unit.