Home Control Smart Metering Plug first steps
Thank you for placing your trust in this devolo product. Carefully read all instructions before setting up the device and store the instructions for later reference. Icons Very important note. Failure to observe this note may result in damage. Important note that should be observed. Background information and configuration tips for your device. Intended use Use the Home Control Smart Metering Plug as described in these instructions and in the Home Control online help to prevent damage and injuries.
devolo Home Control Home Control (also known as home automation) refers to the specific control of electrically operated indoor household devices. The Home Control system by devolo uses the Z-WaveTM wireless standard. A Home Control system requires a Z-WaveTM-compatible control unit such as the Home Control Central Unit from devolo. Use its Home Control portal to coordinate the Home Control Smart Metering Plug and all other Home Control devices.
The Home Control Smart Metering Plug The Home Control Smart Metering Plug can be plugged into any wall outlet in the home. It enhances every connected device with useful functions, such as time-controlled enabling and disabling of power monitoring. Buttons (illuminated red) Figure is country-specific For more descriptions of how the Home Control Smart Metering Plug functions and how to configure it, as well as application examples, please refer to the Home Control online help.
Registering the Home Control Smart Metering Plug on the control unit (e.g. Home Control Central Unit) Multiple Home Control Smart Metering Plugs cannot be plugged into one another. To ensure the best possible wireless range for the Home Control Smart Metering Plug, avoid positioning it behind objects that block the signal (attenuation) and avoid interference sources. Weak signals due to attenuation can result from furniture, plants and especially metal objects which are located between the devices.
Safety notes You must read and have understood all safety and operating instructions for your devolo devices; keep these instructions safe for future reference. DANGER due to electricity Users should never open devolo devices. Opening the device poses a risk of electric shock! Users do not need to carry out any maintenance on devolo devices. In the event of damage, disconnect the devolo device from the mains supply by pulling it or its plug out of the power outlet.
Disconnect the devolo device from the mains supply to clean! Avoid solvent cleaning agents since they can cause damage to the housing. Only use a dry towel for cleaning. DANGER due to overheating Multiple devolo devices must not be interlocked. devolo devices should only be installed at locations that guarantee adequate ventilation. Slots and openings on the housing are used for ventilation: 쎲 쎲 쎲 쎲 쎲 Do not cover devolo devices when operating. Do not place any objects on devolo devices.
Service and warranty Warranty: 3 years If your devolo device is found to be defective during initial installation or within the warranty period, please contact the vendor who sold you the product. The vendor will take care of the repair or warranty claim for you. The complete warranty conditions can be found at www.devolo.com/warranty. Great Britain 0203 024 18 38 (national rate) support@devolo.co.uk Sweden 0077 1400 480 (national rate) support@devolo.
40958/0115 devolo AG Charlottenburger Allee 60 52068 Aachen – Germany www.devolo.
