Product manual

devolo

dLAN

Wireless extender

Establishing a connection

to the dLAN

network

Assigning a specific password to a single adapter will exclude it from the

remaining dLAN

network. If possible, use the dLAN Configuration Wizard to

ensure that a single password is used throughout your entire dLAN

home

network.

4.2.3 Step 3: Add dLAN adapters

At this point, add further dLAN

adapters to your home network. You will

need the 16-character security codes from the labels on the bottom of the

adapter housings. Enter the code without hyphens in the Security ID field

and click Add. If the code is correct, a small icon and the network ID of the

found adapter will appear in the list.

When launching the dLAN

Configuration Wizard again after a successful

initial installation – when integrating a new adapter into the network, for

example – the application will remember devices and security codes entered

in previous sessions. It will therefore not be necessary to enter them again.

The Configuration Wizard will display an error message if an adapter entered

previously is not found. In that case, check whether the HomePlug device is

connected to the power grid and is available.

Once you have entered the security IDs of your dLAN

adapters, your

HomePlug network is complete. All computers and other network devices

connected to the adapters by cable should now be able to communicate with