dLAN® TV SAT Starter Set The Network Innovation
® devolo dLAN TV SAT
© 2013 devolo AG Aachen (Germany) While the information in this manual has been compiled with great care, it may not be deemed an assurance of product characteristics. devolo shall be liable only to the degree specified in the terms of sale and delivery. The reproduction and distribution of the documentation and software supplied with this product and the use of its contents is subject to written authorization from devolo.
devolo AG Charlottenburger Allee 60 52068 Aachen Germany www.devolo.
Contents Contents 1 Preface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 1.1 Thank you for placing your trust in this devolo product . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 1.1.1 About this manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 2 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Contents 3.10 Remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 4 Tuner configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 4.1 Calling up the built-in configuration interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 4.2 Menu description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Contents 5.5 5.6 5.4.5 Internet settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59 5.4.6 Load settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60 5.4.7 Save settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60 Recordings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Contents devolo dLAN TV SAT Starter Set
Preface 9 1 Preface 1.1 Thank you for placing your trust in this devolo product The dLAN TV SAT Starter Set makes complicated wiring of satellite systems a thing of the past. The devolo system uses your home's own electrical network to transmit the TV services. Installation is done in next to no time: Simply connect your satellite system directly to the dLAN TV SAT Multituner and connect this to the mains supply.
10 Preface Description of the symbols Here we briefly describe the meaning of the symbols used in this manual. Very important note. Failure to observe this note may result in damage. Important note that should be observed. Additional information, background material and configuration tips for your device. If you have any further ideas or suggestions related to our products, we would be delighted to hear from you at support@devolo.
Introduction 11 2 Introduction 2.2 What does SAT>IP stand for? dLAN is an intelligent, secure technology that lets you set up a home network easily, quickly and economically via your household electrical wiring, without the need for complex and expensive dedicated cabling. SAT>IP is a new communication protocol for receiving and distributing satellite signals.
12 Introduction devolo dLAN TV SAT Starter Set 쎲 Integrated dLAN adapter—dLAN technology distributes the satellite signal very easily via household power lines. 쎲 Particularly easy installation—no drilling, no mess! 쎲 Can be expanded to up to two dLAN TV SAT Multituners per household. Enables the operation of up to 4 different terminal devices. using the dLAN adapter supplied by devolo and the included power pack. 쎲 Electronic programme guide (EPG) for controlling the integrated video recorder.
Introduction 13 dLAN TV SAT Multituner. The computer in Figure 2 must also be connected via another dLAN adapter. Fig. 2 Fig. 1 The dLAN TV SAT Receiver Kit is a sensible addition to the dLAN TV SAT Starter Set if, for example, you plan on having a second television in the home. For more information on the topic of SAT>IP and possible scenarios, see 8.1 Troubleshooting. Additionally, the website www.devolo.com contains a lot of SAT information for you.
14 Introduction dLAN TV SAT to IP Receiver and HbbTV via dLAN HbbTV is a modern kind of video text from the Internet, sent to a TV set. You will need an existing Internet connection which (as shown in figure 3) is connected via another dLAN adapter to the dLAN home network and therefore to the dLAN TV SAT to IP Receiver and dLAN TV SAT Multituner.
Initial use 15 3 Initial use This chapter covers everything you need to know about the package and setting up your dLAN TV SAT Starter Set. Fig.
16 Initial use 3.1 Package contents Please ensure that the delivery is complete before beginning with the installation of your dLAN TV SAT Starter Set. 쎲 devolo dLAN TV SAT Multituner 쑗 One Euro 8 network cable 쑗 Two antenna cables (coaxial) 쎲 devolo dLAN TV SAT to IP Receiver 쑗 One mains adapter 쑗 One HDMI cable 쎲 devolo dLAN adapter 쑗 One network cable 쎲 Remote control, incl.
Initial use 17 3.3 Indicators and connections of the dLAN TV SAT Multituner The power jack is located on the side of the housing. On the back of the housing next to the two antenna connections you will find the dLAN LEDs, the encryption button and a network jack. Fig. 5 Antenna connections Control lamps This is where you connect the satellite system to the dLAN TV SAT Multituner using the coaxial cable.
18 Initial use 쎲 PLC 쑗 Is lit a steady green if the network connection is suitable for HD video streaming and online gaming; flashes when data is being transmitted. 쑗 Is lit a steady orange if the network connection is suitable for SD video streaming and online gaming; flashes when data is being transmitted. 쑗 Is lit a steady red if the network connection is suitable for simple data transfer and Internet access; flashes when data is being transmitted.
Initial use 19 Fig. 6 Operating status display 쎲 Lights up green when the dLAN TV SAT to IP Receiver is operational. 쎲 Lights up red when the dLAN TV SAT to IP Receiver is in stand-by mode or switched off. The dLAN TV SAT to IP Receiver complies with current EU power-consumer directives and includes a stand-by mode for lower power consumption (power-saving mode). A few seconds after you switch off the dLAN TV SAT to IP Receiver, the device changes to PowerSave mode by default and the display goes blank.
20 Initial use Arrow keys The arrow keys are used to select the desired programme. Display The display shows the dLAN TV SAT to IP Receiver. status of the USB port Use a high-quality USB cable (compliant with the USB specification). 3.4.2 Rear panel The rear panel of the housing contains another USB port, plus all the connections needed for connecting the dLAN TV SAT to IP Receiver to your TV set, the dLAN network and the mains supply.
Initial use 21 HDMI The HDMI cable supplied is used to connect the HDMI socket on the dLAN TV SAT to IP Receiver to your TV set. Ethernet Use the included network cable to connect the LAN socket of the dLAN TV SAT to IP Receiver and dLAN adapter to the network. USB port An external USB hard drive can be connected here for saving TV programmes you want to view later.
22 Initial use The sound is normally played back via the audio output on the TV set. It is also possible to connect an additional audio device such as a hi-fi or digitalsurround system to handle playback. When connecting a device, always make sure that all other devices are disconnected from the mains supply. If you are connecting several devices, be sure to use the included mains adapter to provide 12 V DC to an electrical device requiring this.
Initial use 23 3.5 Indicators and connections of the dLAN adapter Encryption button The dLAN adapter has a monitoring light (LED), two network jacks and an encryption button. Data encryption at the press of a button; for information on how the encryption button functions, refer to Chapter 7 dLAN network or the respective manual on our Internet site: www.devolo.com.
24 Initial use 3.6 dLAN TV SAT Multituner 3.6.1 Setup instructions Positioning on level surface If you place the dLAN TV SAT Multituner on a level surface, select a stable base. Wall mounting Make sure that no gas, water or power lines in the wall get damaged. There is a danger of electric shock! Use suitable fasteners for the respective base to ensure a reliable and secure wall mounting. 3.6.
Initial use 25 3.8 Connecting the dLAN TV SAT to IP Receiver to the dLAN and the mains supply 햲 Note that to use HbbTV and DLNA (media server), you will need another dLAN adapter for each to connect them to the dLAN network. (see 2.5 Sample applications) Connect the dLAN TV SAT to IP Receiver to a dLAN adapter using the included network cable. To avoid electrical damage when connecting the dLAN TV SAT to IP Receiver, always use the power pack supplied.
26 Initial use dLAN TV SAT to IP Receiver will take a few seconds to start. 햵 The TV and radio software assistant will then start automatically. For more information, refer to the next chapter 5 TV and radio programme. 3.9 Installing devolo software 3.9.1 Software for Windows devolo dLAN Cockpit finds all reachable dLAN adapters in your dLAN network, displays information about these devices and encrypts your dLAN network individually.
Initial use 27 3.10 Remote control You can use the infrared remote control supplied to operate all the main functions of the TV and radio programme: Getting started requires just two easy steps: 쎲 Insert the two AAA batteries into the remote control in the correct position (follow the illustration in the battery compartment). Using the batteries incorrectly can damage the remote control.
28 Initial use devolo dLAN TV SAT Starter Set
Tuner configuration 29 4 Tuner configuration The dLAN TV SAT Multituner has a built-in configuration interface that can be called up using a standard web browser. All settings for operating the device can be modified here. 4.1 Calling up the built-in configuration interface manual. The sequence of the description in the manual follows the structure of the menu. Click Save to save the settings of the respective area of the configuration interface.
30 Tuner configuration The four central areas of the configuration interface are displayed on the left edge. Click the button of an area to move directly into it. 쎲 In the Status overview area, you get general information about the dLAN TV SAT Multituner and all connected dLAN and LAN devices. devolo dLAN TV SAT Starter Set 쎲 You can change or modify the various device settings for network and dLAN under Device configuration. 쎲 You can set the recording priority in the Tuner configuration area.
Tuner configuration 31 4.3 Status overview In the Status overview area you can track the status of the tuner and your connected dLAN and LAN devices.
32 Tuner configuration 4.3.1 dLAN status To display all connected dLAN devices, click either the house icon or the dLAN devices arrow. Each connected dLAN device, regardless of whether it is con- You can add additional dLAN devices to your dLAN network by tapping or clicking on Add device. To do this, enter the security ID for the respective dLAN devolo dLAN TV SAT Starter Set nected locally or remotely in the network, is displayed with its MAC address, name and type.
Tuner configuration 33 Before the networking procedure, note the security IDs of all dLAN adapters. This unique identifier of each dLAN device is located on the label on the housing. It consists of 4 x 4 letters separated by dashes (e.g. ANJR-KMOR-KSHTQRUV). Ensure that all dLAN adapters are connected to the power grid and computers or other network components as appropriate. 4.3.2 Tuner status Under Tuner status you can see which tuner is switched to a transponder.
34 Tuner configuration 4.3.3 Ethernet status The status and connection speed for the network jack is shown in this area. 4.4 Device configuration In the configuration area of the device you can modify settings for network and dLAN. 4.4.1 Network settings The dLAN TV SAT Multituner also communicates via the TCP/IP protocol as a component of your home network. The IP address required for this can either be en- devolo dLAN TV SAT Starter Set tered manually or obtained automatically from a DHCP server.
Tuner configuration 35 If a DHCP server is already present in the network for giving out IP addresses, have the option Use this to accept network settings automatically from a DHCP server enabled so that the dLAN TV SAT Multituner automatically receives an address from it. You can also assign a static IP address by making entries under IP address (e.g. '192.168.0.249') and Netmask (e.g. 255.255.255.0). 4.4.2 dLAN settings button (see Chapter 4 dLAN network) or at this spot in the configuration interface.
36 Tuner configuration If you only change the password for a Local device, you exclude it from your Total dLAN network. 4.5 Tuner configuration If you have occupied both satellite connections on the dLAN TV SAT Multituner and a recording initiated on the dLAN TV Sat to IP Receiver is to have priority over a live stream (data transmission via Internet), enable the option A recording programmed via the settop box has priority over a normal stream. devolo dLAN TV SAT Starter Set The dLAN default HomePlugAV.
Tuner configuration 37 If you have enabled the above option, your recording will definitely be made, even if two live streams are running simultaneously, for example, on a tablet and on the receiver. In this case, a live stream is automatically cancelled. There will be no message concerning this.
38 Tuner configuration 4.6 Management In the Management area you can reset the current configuration to the factory defaults, save it to your devolo dLAN TV SAT Starter Set computer as a file or restore it from there and update the firmware of the dLAN TV SAT Multituner.
Tuner configuration 39 4.6.1 Resetting the configuration With the Management Reset configuration command, the dLAN TV SAT Multituner is reset to the original factory defaults. In doing so, you lose your personal settings. The last-assigned dLAN password for the dLAN TV SAT Multituner is also reset. To re-secure your dLAN network individually, read further at 4.3.3 Ethernet status.
40 Tuner configuration 4.6.2 Saving a configuration file To save the active configuration to your computer as a file, select the corresponding button in the area Man- devolo dLAN TV SAT Starter Set agement Save configuration file. Then enter a storage location and name for the settings file.
Tuner configuration 41 4.6.3 Restoring a configuration An existing configuration file can be sent to the dLAN TV SAT Multituner in the area Management Restore device configuration and enabled there. Select a suitable file via the Browse… button and start the operation by clicking the Restore device configuration button.
42 Tuner configuration 4.6.4 Update firmware The firmware of the dLAN TV SAT Multituner includes the software for operating the device. If necessary, de- 햲 devolo dLAN TV SAT Starter Set To bring the firmware up to the latest version, first go to the devolo website, www.devolo.com, and download the appropriate file for the dLAN TV SAT Multituner to your computer. 햳 Then in the configuration dialogue, go to the area Management Update Firmware. Click Browse… and select the downloaded file.
TV and radio programme 43 5 TV and radio programme The dLAN TV SAT to IP Receiver allows you to receive digital satellite (DVB-S) TV and radio programmes. Both high-resolution and normal digital TV can be received. 햲 When you switch the device on for the first time, the installation assistant starts automatically with the language selection. The TV image can be output via HDMI (connection to an HDTV-capable TV set) or SCART cables. 5.
44 TV and radio programme 햳 You are then taken automatically to country and display settings. 쑗 Zoom: Zoom is used to select what to do with the black frames and how a "4:3" image should be adapted to suit a "16:9" screen and vice versa. Existing bars will be deleted and the image will be scaled to the screen. 쎲 HD output resolution: this is where you select the resolution. After you have confirmed your settings with OK, the Antenna configuration appears.
TV and radio programme 45 햵 햶 The dLAN TV SAT to IP Receiver loads the satellite and transponder list. Select a satellite. You end installation by scanning for channels. The installation assistant offers you different options for channel scanning: 쎲 Load pre-programmed list: load the channel list prepared by devolo. 쎲 Start regular search: the selected satellite is scanned. 쎲 Search Astra service list: the channel list information is downloaded from the satellite and the channels sorted by LCN data.
46 TV and radio programme 5.2.1 Channel list Use the arrow buttons to select the Channel List menu and confirm with OK. Press Exit to return to the selected programme. To call up the channel list for the current programme, press OK. number of the selected channel are displayed in the channel list. Please note that the place number for a particular programme may be different in different programme lists. You can sort the order to suit your own preferences.
TV and radio programme 47 with OK, a window appears for you to enter the code (PIN). pressing the FAV button on the remote control. You hide the list by pressing FAV again. Enter the PIN code using the number keys on the remote control. A lock symbol (lock) appears next to the selected channel. Follow the same procedure to unlock the channel. 쎲 Adding a channel in the favourites list 쑗 Using the appropriate arrow key, highlight the channel you want to add to the favourites list, and confirm with OK.
48 TV and radio programme Moving channels Renaming channels Using the arrow keys, highlight the channel you want to move. Select the Move control button at the bottom of the screen and confirm with OK. Using the arrow keys, highlight the channel you want to rename. Select the Name button at the bottom of the screen and confirm with OK. Enter the number of the desired channel and confirm with OK. You can use the left/right arrow keys to move the entry point to the next or previous character.
TV and radio programme 49 Please note: If the filter function is active, only the filtered channels are displayed. To view all channels you first have to deactivate the filter function. For more information, refer to Chapter Channel lock. and the current programme is recorded. The display on the dLAN TV SAT to IP Receiver indicates successful recording with REC. Press STOP to stop instant recording. 5.3 Recording A USB device or external USB drive must be connected before you can record programmes.
50 TV and radio programme Simple to operate 5.3.2 Recording with EPG You have one dLAN TV SAT to IP Receiver and one dLAN TV SAT Multituner (or another twin tuner): You can watch a programme and simultaneously record another programme on another channel. An electronic programme guide (EPG) shows programme information, so you can quickly get an idea of programmes and their content.
TV and radio programme 51 쎲 Text: browses the programme guide. between the real time and timeshift programme is shown on the info line. 쎲 Use the LEFT/RIGHT arrow keys to scroll forwards or back during the timeshift playback. 쎲 Press Stop to end Timeshift mode. The maximum length of timeshift recording depends on the capacity of the connected USB drive and your setting (max. 1.5 hours) in the Settings Recording settings Max. timeshift time menu (see 5.4.4 Recording configuration). 5.3.
52 TV and radio programme Menu Timer and confirm with OK to call up the corresponding menu. Press YELLOW to add a new timer. The Add Timer window is displayed. 쎲 Channel: you use the LEFT/RIGHT arrow keys to navigate through the TV or radio list. 쎲 Recording type: the recording type is displayed. 쎲 Date: the starting date is entered using the LEFT/ RIGHT arrow keys and the numeric pad. 쎲 Start: the starting time is entered using the LEFT/ RIGHT arrow keys and the numeric pad.
TV and radio programme 53 쎲 Repeat: you can set the Timer to repeat once, daily or weekly. 쎲 Playback: you can use the parental control settings or select Allow or Forbid. 쎲 Change/Delete: all changes can be allowed or locked for other users. 쎲 You use the GREEN button to store or the RED button to terminate the process. OK is used to edit the list and the BLUE button to delete it. 5.4 Setup You will find the following parameters under Setup: 5.3.
54 TV and radio programme Channel List Update If you have selected the Channel List Update during the First Time installation, you can update the channel list using this setting. Manual channel scan This is where you manually enter all the details of the desired channel. 쎲 You select the network number from the selection list in the Network search field.
TV and radio programme 55 Fast Channel Scan You select Fast Channel Scan in the Installation menu and confirm with OK. In this menu, you select the satellites to be scanned. You can set the satellite parameters to suit using the navigation buttons: 쎲 Select the GREEN button to scan the selected satellite. 쎲 Select the BLUE button to display the Transponder list. 쎲 Press OK to scan all satellites. 5.4.2 Configuration Go to Settings Configuration to select the settings for the dLAN TV SAT to IP Receiver.
56 TV and radio programme Note that different TV sets respond differently to changed display parameters from the dLAN TV SAT to IP Receiver and may automatically change your own display mode. In this case, refer to the manual for your TV set. These output settings were applied when you initially set up the device. 쎲 TV type: Select “4:3” if you have a conventional TV set or “16:9” if you have a broadband TV set connected.
TV and radio programme 57 쎲 The PIN Settings (parental settings) allows you to make then accessible only by using a PIN code. Select the PIN Settings field and confirm with OK. If a code (PIN) has been assigned, it is now requested and the following sub-menu opened: 쑗 Disabled: all menus are accessible. 쑗 All menus: all menus are only accessible with a password. 쑗 Installation: the installation menu is locked. The user cannot add channels. When the device is supplied, the child safety code (PIN) is 0000.
58 TV and radio programme 5.4.3 Language settings The language selected is used for the menus and the sound track on TV programmes. Select Settings Language settings. 쎲 쎲 쎲 쎲 Menu: displays the currently set menu language. Audio: displays the desired audio language. Subtitle: displays the desired subtitle language. Guide: displays the desired EPG language. 5.4.4 Recording configuration A USB drive must be connected before the recording configuration menu can be displayed.
TV and radio programme 59 쑗 Longest: recordings are deleted starting with the longest, to make room for the programmed timer. 쑗 Shortest: recordings are deleted starting with the shortest, to make room for the programmed timer. 쑗 Unplayed: If this option is set to Excluded, recordings that have not been played back will NOT be deleted. If it is set to Included these recordings will also be deleted. 쎲 Format drive: If you want to delete all files on the attached USB drive, you can use the Format disk option.
60 TV and radio programme If the IP address is not known or if no specific address will be used, select the Dynamic option. In this case, the IP address and the other data will be sourced automatically from a DHCP server. 5.4.7 Save settings This function allows you to save your own settings to the dLAN TV SAT to IP Receiver. When you confirm with OK, all previous entries are overwritten. 5.
TV and radio programme 61 쎲 Blue (delete): delete the selected recording. 쎲 P
62 TV and radio programme Playing videos Select Media Browser USB Device Videos; all available videos will be displayed. 쎲 BLUE: set font size of subtitle. 쎲 EXIT: end video. 쎲 MENU: return to previous menu. Video formats avi, mpg and mkv are supported. Displaying images Select Media browser USB device Photos; all available photo files will be displayed. 쎲 0...9 (jump): jumps to the file selected using the number keys. 쎲 OK: plays the current file 쎲 BLUE: changes the medium type.
TV and radio programme 63 쎲 OPT: sort files by date 쎲 YELLOW: change display style. 쎲 BLUE: change medium type. The JPG image format is supported. Playing MP3 files Select Media Browser USB Device Music; all available music files will be displayed. 쎲 0...9 (jump): jump to file selected using number keys. 쎲 OK: play selected file 쎲 Stop button: stop file playback. 쎲 Playback button: play back all media files in folder, starting with selected file. 쎲 Pause button: pause file playback. 쎲 AUDIO: sort files.
64 TV and radio programme be switched off or disconnected from the mains supply. 햲 Switch the dLAN TV SAT to IP Receiver off and remove the plug from the socket. 햳 Without using force, insert the CI module correctly and facing the right way. 햴 Connect the dLAN TV SAT to IP Receiver again to the mains supply and switch it on. Activation of the module will take a few moments. It may be necessary to set up some CI modules using the Conditional Access menu.
dLAN TV SAT App 65 6 dLAN TV SAT App With the free dLAN TV SAT App from devolo, you can also receive unencrypted satellite television on your smartphone or tablet. The prerequisite for this is an existing Wi-Fi connection, which is connected to the dLAN network via another dLAN adapter. 6.2 Installing dLAN TV SAT App 햲 6.1 System requirements The Wi-Fi Internet connection has to be connected to the dLAN network via an additional dLAN adapter.
66 dLAN TV SAT App 6.3 Menu The screen surface of the dLAN TV SAT App automatically adjusts to the orientation (horizontal/vertical) of the smartphone or tablet. 6.3.2 Settings You can page through the menu and respective view or "surf" through the programme list by swiping across the screen (left/right or up/down). This is where country and satellite specifications are made.
dLAN network 67 7 dLAN network Before you can use a dLAN device in your dLAN network, first you have to connect it to other dLAN AV devices as a home network. Two specific pieces of information are especially important for this: 쎲 Shared use of a dLAN password results in a delimited dLAN network. 쎲 Shared use of the dLAN password serves as access control to the dLAN network as well as the encryption, and thereby the interception protection, of the transmitted data.
68 dLAN network Fig.
dLAN network 69 Expanding an existing dLAN network by adding a new dLAN adapter If you have already secured your existing dLAN network using the encryption button, use the same method to integrate further adapters. Once you have successfully connected the new dLAN adapter, first press the encryption button (approx. 1 second) of one of your network's existing adapters, then press the encryption button (approx. 1 second) of your new dLAN adapter within two minutes.
70 dLAN network Removing a dLAN adapter from a network To remove a dLAN adapter from an existing network, press its encryption button for at least ten seconds. The device will be assigned a new randomly generated password and will thus no longer be able to access the network. To integrate the device into a different dLAN network, follow the steps described above, depending on whether you are setting up a new network or adding the adapter to an existing one. Fig. 11 7.
dLAN network 71 After starting the dLAN Cockpit, all reachable dLAN devices in your home network will appear. This may take a moment. All adapters found in the network appear with as adapter icon with a corresponding product name. The adapter in the middle of the dLAN network identified with the symbol shown here symbolises your locally connected device. If you have multiple dLAN devices connected locally, you can jump back and forth between them.
72 dLAN network The coloured connecting lines of the adapters illustrate the current transmission quality: 쎲 Green: the network connection is suitable for HD video streaming. 쎲 Orange: the network connection is suitable for SD video streaming and online gaming. 쎲 Red: the network connection is suitable for simple data transfer and Internet access. If data transmission from one device to another is actually taking place, the data rate is displayed on the respectively highlighted adapter.
dLAN network 73 Before the networking procedure, note the security IDs of all dLAN adapters. This unique identifier of each dLAN device is located on the label on the housing. It consists of 4 x 4 letters separated by dashes (e.g. ANJR-KMOR-KSHTQRUV). Ensure that all dLAN adapters are connected to the power grid and computers or other network components as appropriate. Scan for local adapter After dLAN Cockpit is started, it searches for the dLAN adapter connected directly to your computer first.
74 dLAN network section. The current network password is assigned automatically to the newly added device.
Appendix 75 8 Appendix Can I use the dLAN TV SAT to IP Receiver even in a multi-dwelling unit? 8.1 Troubleshooting When the satellite signals from the dLAN TV SAT to IP Receiver are transmitted via the mains supply, power meters usually attenuate the signal transmission so much that transmission across the meter is not possible—for example, from apartment to apartment. Reliability and ease of use are important aspects of the design of dLAN TV SAT.
76 Appendix 8.2 Important safety instructions All safety and operating instructions should be read and understood before using the device, and should be kept for future reference. 쎲 Never open the device. There are no user-serviceable parts inside the device. Do not try to service this product yourself! Contact qualified technicians each and every time your device needs maintenance. There is a risk of electric shock! 쎲 Use the devices in dry locations only. 쎲 Make sure you provide a stable base.
Appendix 77 쑗 Do not place any objects on the devices. 쑗 The devices may not be placed directly next to open flame (such as fire or candles). 쑗 Do not keep the device in direct sunlight. 쑗 Never set up the device near a heater or radiator. 쑗 The device should be located only where sufficient ventilation can be ensured. 쑗 Do not insert any objects into the openings of the device. Slots and openings on the case serve as ventilation. Never block or cover them.
78 Appendix 8.3 Bandwidth optimization To significantly improve the transmission capacity of the network, we recommend that you comply with the following "connection rules": 쎲 Plug the device directly into a wall socket. Fig. 12 쎲 To take full advantage of the filter function of the dLAN adapter and to improve data transmission in the network, always plug the multiple socket or devolo dLAN TV SAT Starter Set the dLAN TV SAT to IP Receiver into the electrical socket of the dLAN adapter.
Appendix 79 8.4 The devolo remote control The following is a brief explanation of the buttons on the devolo remote control (from left to right): ON/OFF switch the dLAN TV SAT to IP Receiver on/off Mute switch the mute on/off HDMI change the resolution FAV switch to the favourites list TV/Radio switch between radio and TV 0...
80 Appendix 8.5 Disposal 8.6 Warranty conditions 8.5.
Appendix 81 3 Warranty procedure a) If defects appear during the warranty period, the warranty claims must be made immediately, at the latest within a period of 7 days. b) In the case of any externally visible damage arising from transport (e.g. damage to the housing), the person carrying out the transportation and the sender should be informed immediately.
82 Appendix devolo dLAN TV SAT Starter Set
Index A Arrow keys 20 B Batteries 79 C CE 9 D DHCP server 35 Display 20 Disposal of old devices 80 dLAN encryption 35 dLAN password 35 DVB-S2 receiver 9 E Encryption button 18, 23 EPG 50 Ethernet 21 External hard drive 21 Headphone socket 20 I Infrared remote control 27 Instant recording 49 Integrated electrical socket 23 Integrated video recorder 12 Integrating the new adapter into the network 73 Intended use 10, 76 IP address 34 L Language 58 Linux 26 M Mac (OS X) 26 Mains connection (12 V DC) 22
R Recording priority 36 S S/PDIF 12 SCART 21, 24 Security ID 33, 73 Standby mode 19 T Timer 51 U USB 21 USB port (front) 20 W Warranty 80 Windows 26 devolo dLAN TV SAT Starter Set
