Technical data

Initial use 15
devolo dLAN TV SAT Multituner
쎲 PLC
쑗 Is lit a steady green if the network connection
is suitable for HD video streaming and online
gaming; flashes when data is being transmit-
ted.
쑗 Is lit a steady orange if the network connec-
tion is suitable for SD video streaming and
online gaming; flashes when data is being
transmitted.
쑗 Is lit a steady red if the network connection is
suitable for simple data transfer and Internet
access; flashes when data is being transmit-
ted.
쎲 Ethernet Link/Act: Is lit a steady green when a
connection to the Ethernet network exists; flashes
when data is being transmitted.
Encryption button
Data encryption at the touch of a button; for a func-
tional description of the encryption button, please con-
tinue reading in chapter 6 dLAN network.
Network connection
This is where you connect the dLAN TV SAT Multituner,
for example, to your structured wiring via a commer-
cially available network cable.
3.3.2 Setup instructions
Positioning on level surface
If you place the dLAN TV SAT Multituner on a level
surface, select a stable base.
Wall mounting
Make sure that no gas, water or power
lines in the wall get damaged. There is
a danger of electric shock!
Use suitable fasteners for the respective base to en-
sure a reliable and secure wall mounting.
3.3.3 Connecting the
dLAN TV SAT Multituner
햲 Use one or two coaxial cables with an F-connector
to connect the satellite system to the antenna
input of the dLAN TV SAT Multituner.
햳 Plug the Euro 8 cable into the power jack of the
dLAN TV SAT Multituner and the power plug into
an available power outlet. Thanks to the inte-
grated dLAN adapter, the
dLAN TV SAT Multituner is connected directly to
the dLAN network. To secure your dLAN network,
continue with your network configuration. For
more information, refer to the chapter 6 dLAN
network.