Technical data

Initial use 17
devolo dLAN TV SAT Multituner Kit
For more information, refer to the chapter 7
dLAN network.
3.4 The dLAN adapter
3.4.1 Indicators and connections
The dLAN adapter has a monitoring light (LED), two
network jacks and an encryption button.
Monitoring light
The monitoring light (LED) shows all of the statuses for
the dLAN adapter by illuminating and/or flashing in
different ways:
쎲 The LED flashes at uniform intervals (of 2 s) if
the dLAN adapter is connected to the mains sup-
ply but there is no dLAN connection.
쎲 The LED lights up if the dLAN adapter is ready
to operate and there is a dLAN connection.
쎲 The LED flashes quickly if the encryption process
(pairing) is being performed in the dLAN net-
work.
쎲 The LED flashes at irregular intervals (0.5 s/
2s) if the dLAN adapter is in PowerSave mode.
Network jacks
This is where you connect the dLAN adapter to a com-
puter and/or other network device using commercially
available network cables.
Encryption button
Data encryption at the press of a button; for informa-
tion on how the encryption button functions, refer to
Chapter 6 dLAN network or the respective manual on
our Internet site: www.devolo.com
.
Integrated electrical socket
Plug the mains adapter of your Wi-Fi Internet access
device into the socket of the dLAN adapter. The inte-
grated mains filter eliminates any noise of connected
devices and significantly improves data transmission in
the home network.