Technical data

16 Initial use
devolo dLAN TV SAT Multituner Kit
쎲 PLC
쑗 Is lit a steady green if the network connection
is suitable for HD video streaming and online
gaming; flashes when data is being transmit-
ted.
쑗 Is lit a steady orange if the network connec-
tion is suitable for SD video streaming and
online gaming; flashes when data is being
transmitted.
쑗 Is lit a steady red if the network connection is
suitable for simple data transfer and Internet
access; flashes when data is being transmit-
ted.
쎲 Ethernet Link/Act: Is lit a steady green when a
connection to the Ethernet network exists; flashes
when data is being transmitted.
Encryption button
Data encryption at the touch of a button; for a func-
tional description of the encryption button, please con-
tinue reading in chapter 6 dLAN network.
Network connection
This is where you connect the dLAN TV SAT Multituner,
for example, to your structured wiring via a commer-
cially available network cable.
3.3.2 Setup instructions
Positioning on level surface
If you place the dLAN TV SAT Multituner on a level
surface, select a stable base.
Wall mounting
Make sure that no gas, water or power
lines in the wall get damaged. There is
a danger of electric shock!
Use suitable fasteners for the respective base to en-
sure a reliable and secure wall mounting.
3.3.3 Connecting the
dLAN TV SAT Multituner
햲 Use one or two coaxial cables with an F-connector
to connect the satellite system to the antenna
input of the dLAN TV SAT Multituner.
햳 Plug the Euro 8 cable into the power jack of the
dLAN TV SAT Multituner and the power plug into
an available power outlet. Thanks to the inte-
grated dLAN adapter, the
dLAN TV SAT Multituner is connected directly to
the dLAN network (see also 3.4.2 Connecting
the dLAN adapter). To secure your dLAN net-
work, continue with your network configuration.