Operating instructions

TV and radio programme 35
devolo dLAN TV Sat 2400-CI+
4.4.2 Configuration
Go to Settings  Configuration to select the settings
for the dLAN TV Sat 2400-CI+.
The Country displays the selection of countries found
during the initial set-up.
The Output settings allows you to select different op-
tions for displaying the image on your TV set.
Note that different TV sets respond different-
ly to changed display parameters from the
dLAN TV Sat 2400-CI+ and may automati-
cally change your own display mode. In this
case, refer to the manual for your TV set.
These output settings were applied when you
initially set up the device.
쎲 TV type: Select “4:3” if you have a conventional
TV set or “16:9” if you have a broadband TV set
connected.
쎲 Display format: