Technical data

Network configuration 33
devolo dLAN pro 500 Wireless+
Interfaces
You can enable or disable the interface on the
dLAN pro 500 Wireless+ by enabling or disabling the
corresponding options.
Note that the
dLAN pro 500 Wireless+ can no
longer be reached once all interfac-
es have been switched off.
Buttons
You can enable and disable the Wi-Fi, WPS and dLAN
encryption functions on the dLAN pro 500 Wireless+
by enabling or disabling the option The Wi-Fi, WPS
and dLAN housing buttons are disabled.
Configuration over the web
The option The device can be configured via the
web has to be enabled in order for the configuration
interface to be accessible at all.
Disabling this option rules out the
possibility of configuring and thus
accessing the interface. This status
can be reversed only by resetting
the device to the factory defaults
(see the Reset section).
4.4.2 Network settings
The dLAN pro 500 Wireless+ also communicates via
the TCP/IP protocol as a component of your home net-
work. The IP address required for this can either be en-
tered manually as a static address or obtained
automatically from a DHCP server.
The option Use network settings provided by a
DHCP server is enabled in the factory defaults.