Technical data

22 Initial use
devolo dLAN pro 500 Wireless+
WPS
With the WPS (Wi-Fi Protected Setup) encryption but-
ton, you secure your Wi-Fi network at the touch of a
button.
WPS is one of the encryption standards de-
veloped by the Wi-Fi Alliance for increasing
security in a Wi-Fi home network. The objec-
tive of WPS is to make it easier to add devices
to an existing network. For more detailed in-
formation, refer to chapter 4.5.8 Wi-Fi Pro-
tected Setup (WPS).
dLAN
Via the dLAN encryption button, you secure your dLAN
pro network at the touch of a button:
쎲 To encrypt your dLAN pro network individually,
press each encryption button on the connected
devices for approx. 1 second – within 2 minutes.
쎲 To remove a dLAN pro device from your network,
press the encryption button on the correspond-
ing device for at least 10 seconds.
Reset
The Reset button (on the side of the housing) has two
different functions:
쎲 The device restarts if you press the Reset button
for less than 10 seconds.
쎲 To change the configuration of the
dLAN pro 500 Wireless+ back to the factory
defaults, press the Reset button for more than
10 seconds. Keep in mind that all settings that
have already been configured will be lost!
The reset button can be pressed using the tip
of a ball-point pen.
Fig. 7