dLAN® pro 500 Wireless+ The Network Innovation
® devolo dLAN pro 500 Wireless+
© 2013 devolo AG Aachen (Germany) While the information in this manual has been compiled with great care, it may not be deemed an assurance of product characteristics. devolo shall be liable only to the degree specified in the terms of sale and delivery. The reproduction and distribution of the documentation and software supplied with this product and the use of its contents is subject to written authorization from devolo.
Contents Contents 1 Preface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 1.1 Thank you for placing your trust in this devolo product . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 1.1.1 About this manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 1.2 CE conformity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Contents 4.4 4.5 4.6 4.7 4.3.1 dLAN status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 4.3.2 WLAN status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 4.3.3 Ethernet status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 Device configuration. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Contents 6 Appendix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77 6.1 Bandwidth optimization . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77 6.2 Important safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78 6.3 Disposal of old devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Contents devolo dLAN pro 500 Wireless+
Preface 7 1 Preface compatibility of the device and our warranty terms can be found in Chapter 6 and conclude the manual. 1.1 Thank you for placing your trust in this devolo product You can find the technical data for the dLAN pro 500 Wireless+ in the product information sheet on the enclosed product CD. devolo dLAN business solutions are a favourably priced option for using the power grid infrastructure in a building to establish a broadband IP network.
8 Preface The area dLAN for business projects not only contains product descriptions and documentation, but also updates of devolo software and your device's firmware. We especially recommend the descriptions of the "dLAN pro network," which are arranged according to Application, Sectors and Integration, where you can find lots of interesting background information. 1.
Introduction 9 2 Introduction dLAN is an intelligent, secure technology that lets you set up a home network easily, quickly and economically via your household electrical wiring, without the need for complex and expensive dedicated cabling. The available performance and effort required for the installation also compares favourably to traditional methods. 2.
10 Introduction works into multiple logical, independent networks. They optimise data distribution and make it easier to set up network architecture that is more secure and arranged more clearly. Using VLANs prevents the need for complicated physical wiring. This gives you greater spatial flexibility and saves you having to purchase multiple costly individual devices (e.g. routers, switches).
Introduction 11 쎲 Remote management via the devolo dLAN AVpro manager software. 쎲 Simple configuration via web interface. 쎲 Optimal modification of the device for any usage scenario through network ports that can be disabled and the deactivation of the function buttons on the device. 쎲 WLAN time control with configurable usage times. 쎲 Two internal WLAN antennas; MIMO technology for the best transmission and reception performance. 2.5 Sample applications 2.5.
12 Introduction Fig.
Introduction 13 2.5.2 dLAN pro 500 Wireless+ as a WLAN client Alternatively, the dLAN pro 500 Wireless+ can also be configured as a WLAN client. In this case, the device connects the WLAN network with the devices in the dLAN pro network. This is especially practical if network access is not possible either via dLAN or via Ethernet wiring.
14 Introduction 2.5.3 dLAN pro 500 Wireless+ and VLAN Using the VLAN function, the dLAN pro 500 Wireless+ can establish more complex network architecture. The following illustration shows a building with a single Fig. 3: Rented offices devolo dLAN pro 500 Wireless+ physical network architecture that in turn has to be used by two different companies separately and isolated.
Introduction 15 All network-compatible devices are connected on a single dLAN pro network and share a broadband connection and a VLAN-capable router. All data traffic from each company in this building is contained in a separate VLAN. Here, each data packet sent over the dLAN pro network is given a VLAN tag specific to each dLAN pro 500 Wireless+.
16 Introduction devolo dLAN pro 500 Wireless+
Initial use 17 3 Initial use This chapter covers everything you need to know to set up your dLAN pro 500 Wireless+. It will explain con- necting the device and its functions. We will also briefly introduce the included devolo software. Fig.
18 Initial use 3.1 Package contents Please ensure that the delivery is complete before beginning with the installation of your dLAN pro 500 Wireless+.
Initial use 19 3.3 Functions The dLAN pro 500 Wireless+ has the following elements: 3.3.1 Control lamps The indicator lights (LEDs) show all of the statuses for the dLAN pro 500 Wireless+ by illuminating and/or flashing in different ways: Power 쎲 Green flashing and illumination behaviour: 쑗 The LED lights up green when the dLAN pro 500 Wireless+ is operational. 쑗 The LED flashes briefly, if the dLAN pro 500 Wireless+ is in PowerSave mode.
20 Initial use Check whether the device is connected to the mains supply correctly and whether the encryption process has been carried out successfully. For more information, refer to 3.4 Connecting the dLAN pro 500 Wireless+ and 5 dLAN pro network. 쎲 Green: The network connection is suitable for HD video streaming; flashes when data is being transmitted. 쎲 Orange: The network connection is suitable for SD video streaming and online gaming; flashes when data is being transmitted.
Initial use 21 Ethernet 쎲 Off: The LED does not light up. Check all of the cable connections and check if the connected network components are disabled. 쎲 Green: The LED lights up when a connection to the Ethernet network exists; flashes when data is being transmitted. 3.3.2 Buttons ON/OFF Use the ON/OFF button to switch the Wi-Fi function on or off. Make sure that the Wi-Fi function in the factory defaults is enabled and the Wi-Fi encryption is set to WPA/ WPA2 Private Mode.
22 Initial use WPS With the WPS (Wi-Fi Protected Setup) encryption button, you secure your Wi-Fi network at the touch of a button. Reset The Reset button (on the side of the housing) has two different functions: WPS is one of the encryption standards developed by the Wi-Fi Alliance for increasing security in a Wi-Fi home network. The objective of WPS is to make it easier to add devices to an existing network. For more detailed information, refer to chapter 4.5.8 Wi-Fi Protected Setup (WPS). Fig.
Initial use 23 3.3.3 Network jacks The three LAN ports can be used to connect computers or other network devices to the dLAN pro 500 Wireless+ via commercially available network cables. ETH 1 ETH 2 3.4 Connecting the dLAN pro 500 Wireless+ This section describes how to connect your dLAN pro 500 Wireless+ to a computer or other network device. 햲 Use a network cable to connect the dLAN pro 500 Wireless+ to the network port of your running computer or other network device.
24 Initial use dLAN AVpro manager, the encryption button or enter the dLAN password on the configuration interface to secure your dLAN pro network from unauthorised access. For information on how to proceed, please read further in chapter 4.4 Device configuration and/or chapter 5 dLAN pro network. For detailed information about connecting other devolo dLAN devices, visit our website: www.devolo.com.
Network configuration 25 4 Network configuration 4.2 Menu description The dLAN pro 500 Wireless+ has a built-in configuration interface that can be called up using a standard web browser. All settings for operating the device can be modified here. All menu functions are described in the corresponding interface as well as in the associated chapter in the manual. The sequence of the description in the manual follows the structure of the menu. 4.
26 Network configuration The five central areas of the configuration interface are displayed on the left edge. Click the button of an area to move directly into it. 쎲 In the Status overview area, you get general information about all connected dLAN, Wi-Fi and LAN devices. 쎲 You can make the various device settings for security, network, dLAN and time under Device configuration. 쎲 You can modify Wi-Fi settings in the WLAN configuration area. 쎲 You can make VLAN settings in the VLAN configuration area.
Network configuration 27 devolo dLAN pro 500 Wireless+
28 Network configuration 4.3.1 dLAN status To display all connected dLAN devices, click either the Ready to operate icon or the dLAN devices arrow. Each connected dLAN device, regardless of whether it is connected locally or remote in the network, is dis- 4.3.2 WLAN status To display all connected Wi-Fi devices, click either the Ready to operate icon or the WLAN devices arrow. Clicking the Wi-Fi icon brings you directly to the WLAN configuration area (see 4.
Network configuration 29 If WLAN client mode is enabled, the display of the Wi-Fi access points is removed from the status overview. 4.3.3 Ethernet status The status and connection speed for the three network jacks are shown in this area.
30 Network configuration 4.4 Device configuration In the configuration area of the device you can modify settings for security, network, dLAN, date and time as well as LED settings.
Network configuration 31 4.4.1 Device security By default, the built-in configuration interface of the dLAN pro 500 Wireless+ is not protected with a password. However, we recommend assigning a password when the installation of the dLAN pro 500 Wireless+ is complete to protect it against tampering by third parties. In this area you can control the access to the configuration interface as well as enable and disable the functions of the interfaces and buttons on the dLAN pro 500 Wireless+.
32 Network configuration 햳 Call up the configuration interface again later; the following window appears first: 햴 Enter admin in the User name field and your individual password in the Password field. The admin user name cannot be changed.
Network configuration 33 Interfaces Configuration over the web You can enable or disable the interface on the dLAN pro 500 Wireless+ by enabling or disabling the corresponding options. The option The device can be configured via the web has to be enabled in order for the configuration interface to be accessible at all. Note that the dLAN pro 500 Wireless+ can no longer be reached once all interfaces have been switched off.
34 Network configuration If a DHCP server is already present in the network for giving out IP addresses, have the option Use network settings provided by a DHCP server enabled so that the dLAN pro 500 Wireless+ automatically receives an address from it. You can also assign a static IP address by specifying an IP address, subnet mask, prefix length, name server and default gateway.
Network configuration 35 4.4.3 dLAN settings In a dLAN pro network, all connected components must use the same password. The dLAN password can be defined using dLAN AVpro manager, via the dLAN encryption button (see chapter 5 dLAN pro network) or in the 4.4.3 dLAN settings section on the configuration interface.
36 Network configuration Activate the Allow power saving mode option, and enter a desired wait time (in minutes) for when the dLAN pro 500 Wireless+ should automatically change into save energy status.
Network configuration 37 4.4.4 Time server A time server is a server on the Internet whose task consists of providing the exact time. To see which Internet time server your computer uses to communicate, simply click the clock in the lower right corner of the screen and select the Internet time tab. Enable the option Retrieve date and time automatically, so that the dLAN pro 500 Wireless+ can automatically synchronise the date and time. Select your Time zone and the Time server.
38 Network configuration 4.4.5 LED settings Activate the Switch off LEDs option if they are intended to be switched off. 4.5 WLAN configuration You can make all necessary Wi-Fi settings in the Wi-Fi configuration area. The device features three different modes: Off, Access point and WLAN client. De- devolo dLAN pro 500 Wireless+ pending on the selection, the corresponding Wi-Fi functions and options are displayed.
Network configuration 39 WLAN configuration off WLAN configuration as client If you would like, you can completely shut off the Wi-Fi part of your dLAN pro 500 Wireless+, e.g. if you want to operate it exclusively as a simple dLAN device via the built-in Ethernet connections. To do so, under WLAN configuration select the Off mode and confirm your entry with Save WLAN mode or simply press the WiFi ON/OFF button on the housing. The operating state of the device is displayed under 4.3 Status overview.
40 Network configuration 쎲 Thirteen channels are available at the standard 2.4 GHz frequency. 쎲 If you select the higher 5 GHz frequency range, it is important to ensure that all of your connected devices also support this frequency band. From channel 52 onward you go into the radar range. When accessing the device for the first time, a radar detection phase starts automatically, during which the dLAN pro 500 Wireless+ cannot be accessed.
Network configuration 41 Lowering the transmitting power In this section, you can adjust the Wi-Fi transmission level to your needs. I.e. if you do not require a large range. For example, if you are in the same room as the dLAN pro 500 Wireless+, select low power. 4.5.2 WLAN time control To be able to use the Wi-Fi time control, the option Retrieve date and time automatically must be enabled under Device configuration Date and time. An enabled Internet connection is also required (see 4.4.
42 Network configuration To be able to use the Wi-Fi time control, enable the option Enable time control. The time control automatically switches your wireless network on and off at certain times of the day. You can define two time periods during which your wireless network is to be enabled for each weekday. devolo dLAN pro 500 Wireless+ Then the time control automatically switches the wireless network on or off.
Network configuration 43 Keep in mind that, as long as the dLAN pro 500 Wireless+ registers connected stations, the wireless network remains enabled. The wireless network is not switched off until the last station has logged off. 4.5.3 RADIUS server In addition to the WPA/WPA2 Private Mode encryption key, the dLAN pro 500 Wireless+ also 4.5.4 Parental controls You can regulate Internet access for specific stations based on time using this function.
44 Network configuration quired (see 4.4.4 Time server). The time server is enabled by default. If you would like to set up a daily time quota, enable the option Turn on parental controls. Now enter the MAC addresses for the stations for which you would devolo dLAN pro 500 Wireless+ like to set up a time quota. You can enter the MAC addresses manually or select them from the list of currently known stations (see 4.3.2 WLAN status WLAN devices). Confirm each entry with Add.
Network configuration 45 4.5.5 WiFi Move Technology Wi-Fi Move Technology is a function for synchronising the Wi-Fi settings of all dLAN pro 500 Wireless+ connected to your network in the access Point mode. Observe the following rules when using WiFi Move Technology: WiFi Move Technology support enabled 쎲 When Wi-Fi client mode is enabled and VLAN is active, WiFi Move Technology remains disabled. To activate WiFi Move Technology, you must first switch off the VLAN function (see 4.
46 Network configuration Only devolo dLAN pro devices interchange Wi-Fi options. Wi-Fi configuration in factory defaults: In the factory default settings of the dLAN pro 500 Wireless+, the Wi-Fi function is enabled and the Wi-Fi encryption WPA/WPA2 Private Mode is configured. The default Wi-Fi key is the Wi-Fi key of the corresponding device. You will find the key on the label on the back of the housing. 4.5.
Network configuration 47 devolo dLAN pro 500 Wireless+
48 Network configuration Settings for the access point To enable a Wi-Fi network, select Enable this access point. The SSID specifies the name of your wireless network. You can see this name when logging onto the Wi-Fi and thereby identify the correct subnet. If you enable the Hide SSID option, your wireless network name remains hidden. In this case, potential network users must know the exact SSID and enter it manually to be able to set up a connection.
Network configuration 49 The factory defaults have this option disabled, i.e. all Wi-Fi devices present in the network can freely exchange data with each other ("peer-to-peer" mode). WLAN filters In addition to encryption, you can secure your wireless network even more by using a Wi-Fi filter to limit access via Wi-Fi to the dLAN pro 500 Wireless+ for selected devices. Even if the encryption is switched off, the device will not establish a connection.
50 Network configuration The Wi-Fi filter should be used only as an additional option. By using it you could limit access to your wireless network, but without encryption it would be relatively easy for third parties to eavesdrop on all of your data transmissions. To use the Wi-Fi filter, enable the option Enable filters. Now you can enter various network devices by means of what is known as your MAC address for access to your dLAN pro 500 Wireless+. Confirm each entry with Add.
Network configuration 51 Security (encryption) Without encryption, not only are all data transmitted from client computers to the dLAN pro 500 Wireless+ in your wireless network without protection, but there is also no password prompt to establish the connection. If no other security measures were set up, such as a Wi-Fi filter (see WLAN filters), third parties can gain access to your network at any time and, for example, share your Internet connection. Usually this happens without you noticing it.
52 Network configuration To secure the data transmission in your wireless network there are two security standards available for the Access Point mode. devolo dLAN pro 500 Wireless+ 쎲 The older and weaker WEP standard can protect communication with the help of a key having either 10 or 26 hexadecimal characters.
Network configuration 53 쎲 The state-of-the-art WPA/WPA2 (Wi-Fi Protected Access) Private Mode methods allow individualised keys consisting of letter and numbers and the displayed special characters with a length of up to 63 characters. You can simply enter them via the keyboard. Under Mode, you can limit access of clients to the dLAN pro 500 Wireless+ to the method you have selected. In addition, the dLAN pro 500 Wireless+ also supports the WPA/WPA2 Enterprise Mode encryption key.
54 Network configuration ternet connection. The guest account can have its own SSID, time limit and Wi-Fi password. This way your vis- devolo dLAN pro 500 Wireless+ itors can surf the Internet without having access to your local network.
Network configuration 55 Settings To set up a guest account, enable the Activate guest account option. If you would like to restrict internet use, enable the Only allow restricted use option as well. 63 characters. You can simply enter this using the keyboard, without having to convert it into hexadecimal format first. Under Mode, you can limit access to the dLAN pro 500 Wireless+ to the method you have selected. Define the name of the guest network in the SSID field.
56 Network configuration 4.5.8 Wi-Fi Protected Setup (WPS) Wi-Fi Protected Setup (WPS) is one of the international encryption standards developed by the Wi-Fi Alliance for easily and quickly setting up a secure wireless network. The encryption keys of the respective Wi-Fi client devolo dLAN pro 500 Wireless+ are transmitted automatically and continuously to the other Wi-Fi client(s) of the wireless network.
Network configuration 57 WPS via PBC (Push Button Configuration): 햲 햳 the exchange their encryption keys and establish a secure Wi-Fi connection. The Wi-Fi LED on the front panel indicates the synchronisation process by flashing. 쑗 either by pressing the WPS button on the front panel of the device or 쑗 by pressing the Start setup button on the user interface under Wi-Fi configuration Wi-Fi Protected Setup (WPS).
58 Network configuration advance, this setting remains with the previously assigned password. 4.5.9 dLAN pro 500 Wireless+ as a WLAN client If you have defined the dLAN pro 500 Wireless+ as a Wi-Fi client, the following menu appears: For a description of WLAN settings, refer to chapter 4.5.1 Basic settings.
Network configuration 59 In the SSID field, enter the SSID of the access point for which you would like to register. Security (encryption) To secure the data transmission in your wireless network there are two security standards available for WiFi Client mode.
60 Network configuration devolo dLAN pro 500 Wireless+
Network configuration 61 쎲 The older and weaker WEP standard can protect communication with the help of a key having either 10 or 26 hexadecimal characters. 쎲 The state-of-the-art WPA/WPA2 (Wi-Fi Protected Access) Private Mode methods allow individualised keys consisting of letter and numbers and the displayed special characters with a length of up to 63 characters. You can simply enter them via the keyboard.
62 Network configuration 쎲 When VLAN is active, WiFi Move Technology remains disabled. To enable WiFi Move Technology, you must first switch off the VLAN function (see 4.5.5 WiFi Move Technology). devolo dLAN pro 500 Wireless+ 쎲 If you enable the VLAN function (see 4.5.5 WiFi Move Technology), WiFi Move Technology is disabled.
Network configuration 63 4.6.1 Create VLAN The factory defaults have VLAN 1 configured with VLAN ID 2. You can configure additional VLANs under Create VLAN. In doing so, a VLAN (VLAN 1 to VLAN 15) has to be selected and a VLAN ID (1 to 4094) assigned. When creating VLANs, already assigned VLAN IDs cannot be assigned a second time. Configured VLANs are illustrated in the overview.
64 Network configuration 4.6.3 VLAN port settings The VLAN port settings are configured here. The existing ports of the dLAN pro 500 Wireless+ are listed in the first left column. The configuration of the dLAN port is not available until future software versions. The configured VLANs are listed in the row header. The ports can be assigned to the VLANs via the matrix.
Network configuration 65 Multiple VLANs can be assigned to the Ethernet ports and the dLAN port. ETH 1 ETH 2 ETH 3 Wi-Fi ports can be assigned only to a VLAN. For detailed information about this, refer to the online FAQs on our Internet site www.devolo.com. If the Wi-Fi mode Access point is enabled, only the access points are assigned to the VLANs. If the Wi-Fi mode WLAN client is enabled, only the Wi-Fi client is assigned to the VLAN.
66 Network configuration 4.7 Management In the Management area you can reset the current configuration to the factory defaults, save it to your devolo dLAN pro 500 Wireless+ computer as a file or restore it from there and update the firmware of the dLAN pro 500 Wireless+.
Network configuration 67 4.7.1 Resetting the configuration With the Management Reset configuration command, the dLAN pro 500 Wireless+ is reset to the original factory defaults. In doing so, you lose your personal settings. The last-assigned dLAN password for the dLAN pro 500 Wireless+ is also reset. To re-secure your dLAN pro network individually, read further at 4.4.3 dLAN settings.
68 Network configuration 4.7.2 Saving a configuration file To save the enabled configuration to your computer as a file, select the corresponding button in the area devolo dLAN pro 500 Wireless+ Management Save configuration file. Then enter a storage location and name for the settings file.
Network configuration 69 4.7.3 Restoring a configuration An existing configuration file can be sent to the dLAN pro 500 Wireless+ in the area Management Restore device configuration and enabled there. Select a suitable file via the Browse… button and start the operation by clicking the Restore device configuration button. 4.7.4 Update firmware The firmware of the dLAN pro 500 Wireless+ includes the software for operating the device.
70 Network configuration 햲 To bring the firmware up to the latest version, first go to the devolo website, www.devolo.com, and download the appropriate file for the dLAN pro 500 Wireless+ to your computer. 햳 Then in the configuration dialogue, go to the area Management Update Firmware. Click Browse… and select the downloaded file. 햴 Then start the update procedure with the Update Firmware button. After a successful update, the dLAN pro 500 Wireless+ restarts automatically.
dLAN pro network 71 5 dLAN pro network 5.1 Security in the dLAN Before you can use the dLAN pro 500 Wireless+ in your dLAN pro network, first you have to connect it to other dLAN pro devices as a home network. Two specific pieces of information are especially important for this: 쎲 Shared use of the dLAN password serves as access control to the dLAN pro network and results in a delimited dLAN pro network.
72 dLAN pro network The following section contains exact instructions of encryption on the basis of possible network scenarios: Devices cannot be configured while in Standby mode. Encrypting a new dLAN pro network with a dLAN pro 500 Wireless+ and an additional dLAN pro device Once both dLAN pro devices have been successfully connected, press each encryption button for > one second within two minutes of one another. That's it! Your dLAN pro network is now protected against unauthorised access. Fig.
dLAN pro network 73 Expanding an existing dLAN pro network by adding another dLAN pro device encryption button (> one second) of your new dLAN pro device within two minutes. If you have already secured your existing dLAN pro network using the encryption button, use the same method to integrate further devices.
74 dLAN pro network Removing a dLAN pro device from a network To remove a dLAN pro 500 Wireless+ or another dLAN pro device from an existing network, press its encryption button for at least ten seconds. The device will be assigned a new randomly generated password and will thus no longer be able to access the network. Fig.
dLAN pro network 75 5.3 dLAN AVpro manager The installation wizard installs the devolo dLAN AVpro manager configuration software as well as the associated manual on the Windows operating system (see 3.4.1 Software for Windows and Linux). In addition to the individual encryption of your dLAN pro network and the security from unauthorised access, devolo dLAN AVpro manager offers other expanded dLAN functions.
76 dLAN pro network devolo dLAN pro 500 Wireless+
Appendix 77 6 Appendix 6.1 Bandwidth optimization To significantly improve the transmission capacity of the network, we recommend that you comply with the following "connection rules": 쎲 Plug the device directly into a wall socket. Avoid multiple sockets. 쎲 You should connect all additional network devices that are connected to a multiple socket to the mains power supply via the electrical socket integrated into the dLAN pro 500 Wireless+. Fig.
78 Appendix For the permitted voltage range for operating the device and the power consumption, refer to the label on the rear side of the device. Additional technical information is available on the product sheet. 6.2 Important safety instructions All safety and operating instructions should be read and understood before using the device, and should be kept for future reference. 쎲 Never open the device. There are no user-serviceable parts inside the device.
Appendix 79 쑗 liquid has been spilled on the device or objects have fallen into the device. 쑗 the device has been exposed to rain or water. 쑗 the device does not work, even though the operating instructions have been followed properly. 쑗 the device’s case is damaged. 6.
80 Appendix 3 Warranty procedure a) If defects appear during the warranty period, the warranty claims must be made immediately, at the latest within a period of 7 days. b) In the case of any externally visible damage arising from transport (e.g. damage to the housing), the person carrying out the transportation and the sender should be informed immediately.
Index C CE declaration 8 D Default Wi-Fi key 21, 46, 53, 61 devolo dLAN AVpro manager 24, 75 DHCP server 34 Disposal of old devices 79 dLAN encryption 35 dLAN password 35 dLAN pro network 71 E Encryption button 71 I Important safety instructions 78 Indicator lights 19 IP address 33 L LAN (Network connection) 23 M MAC address 50 Multi-SSID 46 P Package contents 18 Parental controls 43 R RADIUS server 43 Rented offices 14 Reset 22 S Security ID 21 Software installation 24 SSID 48 System requirements 18 T tag
Wi-Fi access point 28 Wi-Fi antenna 23 Wi-Fi client 39 Wi-Fi filter 49 Wi-Fi key 46 WiFi Move Technology 45 Wi-Fi ON/OFF button 21 Wi-Fi Protected Setup (WPS) 22, 56 Wi-Fi time control 42 WPA 61 WPA/WPA2 Enterprise Mode 53, 61 WPA/WPA2 Private Mode 53 devolo dLAN pro 500 Wireless+
