Specifications

Network management
65
devolo dLAN AVpro manager
4.4.5 Important notes on remote access
1. The communication channel to the respective dLAN network is open for
you if you are accessing it remotely. It remains reserved for you until you
end remote access.
You can leave remote access enabled continuously.
2. Protect your Connect ID from unauthorised use!
3. Note that, when remotely accessing a dLAN network at a remote location,
the database of the dLAN AVpro manager instance at the remote location
is not used but rather just the database of the dLAN AVpro manager
instance running remote access. dLAN networks are managed separated by
locations in the database of the respective dLAN AVpro manager instance.
This is intended to prevent mix-ups with the dLAN networks of other loca-
tions when managing the dLAN networks of one location.
4. If multiple persons using different instances of dLAN AVpro manager are
running remote access to dLAN networks of the same location at different
times in sequence, they have to coordinate their work:
 Notify other persons authorised to run remote access before starting
remote access.
 After ending remote access, ensure that all persons authorised to run
remote access have access to this database and use it when carrying
out their configuration activity.
5. If you are preparing configurations for a dLAN network of the respective
location before a pending remote access session, you have to correctly
select the location of this dLAN and the devices it encompasses.
 Do this for the respective network in the Network menu under Define
location.
 Do this for the respective dLAN devices in the Edit device data menu
item in the device's context menus.