Specifications

Network management
59
devolo dLAN AVpro manager
4.3.5.3 Automatic update
The Automatic update feature ensures that each change is immediately trans-
mitted to the respective devices and is activated there. The feature works on all
of the networks in the database.
You can enable this function by clicking on the menu item Automatic update in
the Network menu or pressing the function key F7.
The following message appears:
You have to confirm this message with OK.
The respective network may be inaccessible for a few minutes while the Auto-
matic update feature is running for a network. If this is undesirable, you should
disable the Automatic update feature by removing the check mark in front of the
Automatic update menu item in the Network menu by clicking on it.
The network is updated after confirming with OK. dLAN AVpro manager outputs
a message (see Chap. 4.3.5.1).
You can cancel the ongoing Automatic update process at any time by clicking
on Cancel. If this case, the current assignment in progress at a dLAN device con-
tinues until concluded, but afterwards all of the dLAN devices that have not yet
been updated remain in the "old" state.
Fig. 32 : Message during ongoing "Automatic update" process