Specifications

Profiles
devolo dLAN AVpro manager
36
Examples:
- If you want to decrease the transmitting power by 10 dB, enter the value
"-10.0" in the Lowering field.
- If you want to completely suppress the signal in a specified frequency
band, enter the value "-30.0" in the Lowering field.
The tab key conveniently moves the cursor from one input field to the next while
entering the values.
In order to remove an entry or to remove the entered attenuation, click the red
X to the right next to the respective entry.
Your changes are shown immediately in the frequency diagram. After clicking on
OK, the settings are taken over in the profile and the profile is closed.
Fig. 20 : Configuring attenuation of carrier frequency ranges