Specifications

dLAN AVpro manager
devolo dLAN AVpro manager
28
ple drag an available device from the "Unused devices" list onto the network
name of a new, empty segment in MDU dLAN, the respective device automati-
cally becomes master of that segment due to this action. If you would like to
drag the device to a segment that already has a master, the device is automati-
cally created as a slave in the respective segment.
In the network tree, detailed information on the respective device is displayed
on the right of the dLAN device icons:
 MAC addresses in the form of six hexadecimal numbers separated by
colons
 Possible gross receive data rate [Rx] (Mbps)
 Possible gross data transmission rate [Tx] (Mbps)
 Profile name (if assigned)
You sort the devices in the network tree by clicking on the MAC address or pro-
file. Clicking again on the respective term reverses the sort direction.
Even if the final location of use for a dLAN device in its dLAN is not yet estab-
lished, you should immediately assign the device an individual description so
that you can recognise it more easily. If you have not yet made these specifica-
tions when setting up the network in the dLAN AVpro manager, you can retrieve
this description at any time by right-clicking on and opening the window for the
device properties to edit the description or change the device name.
The device icon for every dLAN device in the dLAN is automatically adapted to
the current status of the device when starting dLAN AVpro manager. In this way,
dLAN AVpro manager enables you to have a quick overview of the status of all
dLAN devices in the selected network.
The status display of the devices in the network is refreshed in the Device menu
(click on Refresh)
or click on the Refresh view action button,
or use the F5 function key.