Specifications

Initial use

devolo dLAN 200 AVeasy

2.3.1 Control lamps (LEDs

2.3.2 Connection

 Network connection

 This is the connection point on the dLAN 200 AVeasy for connecting it

to a computer or another network device with the network cable (inclu

ded).

2.3.3 Encryption button

 Data encryption at the touch of a button;

 For more information on the functions of the encryption button, please

see the chapter 3.1 '

dLAN 200 AV network encryption at the touch of a

button'.

Please note that all dLAN 200 AV devices to be connected to your network are

also connected to your household electrical wiring. A dLAN 200 AV device

switches to Standby mode after a short while if no active network device such

as a computer is connected to the network port. In Standby mode, the dLAN 200

AV device cannot be accessed via the power supply grid. As soon as the network

device (e.g. computer) connected to the network interface is switched on again,

your dLAN 200 AV device can also be reached again via the electrical wiring.

2.4 Connecting the dLAN 200 AVeasy

This section describes how to connect your dLAN 200 AVeasy to a computer or

other network device.

Power

green Lit steady when dLAN 200 AVeasy is ready for operation;

flashes when dLAN 200 AVeasy is in standby mode.

dLAN

green The network connection is suitable for HD video streaming;

flashes when data is being transmitted.

orange The network connection is suitable for SD video streaming

and online gaming; flashes when data is being transmitted.

red The network connection is suitable for simple data transfer

and Internet access; flashes when data is being transmitted.

Ethernet

green A 100 Mbps or 10 Mbps connection to the Ethernet net-

work exists; flashes when data is being transmitted.