Product manual

devolo dLAN 200 AVpro host
4
Configuration
About this manual
Structured as step-by-step guide, this short manual simply describes the
enhancements of the dLAN 200 AVpro host firmware version 2 and
introduce you to the new management features.
For more information on the dLAN 200 AVpro host please refer to the dLAN
200 AVpro host product manual on our website www.devolo.com
.
What the dLAN 200 AVpro host firmware V2
offers you
Due to the firmware version 2 the dLAN 200 AVpro host plays a dedicated
role as management station in the dLAN segment which the host is attached
to. dLAN 200 AVpro devices which do not have own Layer 3 management
capabilities like dLAN 200 AVpro2/i and dLAN 200 AVpro WP, now can be
managed remotely over the Internet. This enhanced management is primarily
based on the web interface but also available via SNMP. When
communicating via Powerline, 63 remote devices can be supported; when
communicating via Coax-line, 253 remote devices can be supported.
SNMP traps
Now, the SNMP interface can be configured to send SNMP traps in case of
registered devices coming into or leaving the logical network, especially in
case of error.
Default HTTP authentication
By default, the HTTP web interface access is secured by user admin and
password devolo. The default IP address is 10.10.1.69 (no change).