Product manual

devolo dLAN 200 AVpro host

Configuration

1.8 SNMP Traps

Under Overview > Device configuration > SNMP traps you can enable

SNMP traps.

Check Send SNMP traps and configure the IP address of the SNMP

manager, where the traps shall be sent.

A trap is fired, if a registered device either joins or leaves the logical network,

especially in error situations.

1.9 Remarks

• When working with large device lists, we recommend to use Firefox

instead of Internet Explorer as web browser because the needed

Java support of Internet Explorer is rather slow

• For technical reasons, there is no more support of Coax mode in V2

of dLAN 200 AVpro host firmware.

• Limited support of Safari web browser

For more information please refer to the dLAN 200 AVpro host product

manual on our website www.devolo.com