Product manual

devolo dLAN 200 AVpro host
15
Configuration
transmitting power (=0 dB attenuation/gain). The maximum attenuation is -
30 dB.
Examples:
To decrease the transmitting power in the whole frequency range by 10 dB,
enter:
• Start frequency: “1.8” – End Frequency: “30” – Attenuation: “-10”
To "notch out" the signal between 12 and 14 MHz, enter:
• Start frequency: “12” – End Frequency: “12” – Attenuation: “-30”
As soon as the settings for a specific band have been saved (click Save), an
additional set of input boxes for further configuration appears. If you want to
delete settings for a specific frequency band, mark the delete checkbox to the
right and click Save.
1.6.4 Transmission priorisation
State-of-the-art applications such as IPTV and Voice over IP place high
demands on transmission quality. To realize interference free transmission of
this multimedia content, your dLAN 200 AV network can be configured such