Product manual

devolo dLAN 200 AVpro host
14
Configuration
1.6.2 Bandwidth
The bandwidth for downstream and upstream can be limited to values
between 64 kbps and 16384 kbps (16 Mbps) in steps of 64 kbps. Values
which are not a multiple of 64 kbps are rounded automatically. The default
value 0 kbps results in no bandwidth limitation. Downstream is the direction
from the dLAN 200 AVpro host to the remote device, upstream vice versa.
1.6.3 Output Power
In the current HomePlug AV standard, corresponding dLAN adapters transmit
in the frequency range between 1.8 and 30.0 Mhz. Due to the radiation of
the signals from the power cables used for transmission, in some cases,
interference with other services (e.g. amateur radio) in this frequency range is
possible. Therefore, certain frequencies or frequency ranges can be
specifically attenuated or cut out (notched out) entirely.
In the top left input fields, enter the start and the stop frequency of the
frequency band to be attenuated in the format "xx.xx". Values outside the
defined values are corrected automatically. Then, enter the attenuation in dB
in the input field to the right. This is always calculated relative to the normal