Specifications

Installation 13
devolo dLAN 200 AVpro DINrail
3 Installation
In this chapter we describe the electrical installation of
the dLAN 200 AVpro DINrail on the top-hat rail in the
power distribution box.
Package contents
Please ensure that the delivery is complete before be-
ginning with the installation of your
dLAN 200 AVpro DINrail.
쎲 dLAN 200 AVpro DINrail
쎲 Ethernet cable
쎲 CD containing software and online documenta-
tion
devolo AG reserves the right to change the package
contents without prior notice.
System requirements
쎲 Operating systems: Windows XP (32-bit), Win-
dows Vista Home Premium (32-bit/64-bit), Win-
dows 7 Home Premium (32-bit/64-bit), Linux
(Ubuntu), Mac (OS X) and all operating systems
with network support
쎲 Ethernet connection
3.1 Important safety instructions
All safety and operating instructions should be read
and understood before using the device, and should be
kept for future reference.
Installation may be performed by a
qualified electrician only (in acc.
with German Low Voltage Connec-
tion Ordinance (NAV)*, Part 2, §13).
Components powered by the mains
supply have to be secured with a cir-
cuit breaker.
쎲 The device is intended for installation on the top-
hat rail in the installation area of overvoltage cat-
egory 3 or lower.
쎲 Never open the device. There are no user-service-
able parts inside the device.
쎲 Use the device in a dry location only.
쎲 Do not insert any objects into the openings of the
device.
쎲 Slots and openings on the case serve as ventila-
tion. Never block or cover them.
쎲 Do not keep the device in direct sunlight.
쎲 Never set up the device near a heater or radiator.
*for Germany: NAV = Niederspannungsanschluss-
verordnung (Low-voltage Connection Ordinance) of
3 September 2010