Instructions

Initial use 14
devolo dLAN 1200 triple+
The dLAN password can be set in different ways:
dLAN network encryption at the touch of a
button
햴 First press the encryption button of the
dLAN 1200+ for approx. 1 second, and then
within 2 minutes press the encryption button of
the dLAN 1200 triple+ for approx.1 second.
As soon as the indicator lights light up white
on both devices, your dLAN network is set up
and protected from unauthorised access.
or
dLAN network encryption by entering the dLAN
password in the devolo Cockpit
More information can be found in Chapter 4.3
devolo Cockpit.
3.3.2 Addition – Expanding an additional
network
햲 Plug the dLAN 1200 triple+ into a wall socket. As
soon as the LED indicator light flashes red at regu-
lar intervals of 0.5 sec., the adapter is ready to
operate but not yet integrated into the dLAN
network.
Integrating the dLAN 1200 triple+ into an existing
dLAN network
Before you can use the dLAN 1200 triple+ in your
dLAN network, first you have to connect it to your
existing dLAN devices as a network. This is accom-
plished by using a shared dLAN password. The dLAN
password can be set in different ways:
dLAN network encryption at the touch of a
button
햳 First press the encryption button on a device in
your existing network for approx. 1 second and
within 2 minutes, press the encryption button of
the new dLAN 1200 triple+ for approx. 1 second.
The new dLAN 1200 triple+ is now integrat-
ed into your existing, encrypted dLAN
network.
or
dLAN network encryption by entering the dLAN
password in the devolo Cockpit
More information can be found in Chapter 4.3
devolo Cockpit.