Instructions

15 Introduction
devolo Magic 2 LAN triple
You can find detailed information about in-
stalling devolo Magic adapters in Chapter
3.3.2 Single—Expanding an existing PLC
network by adding another
devolo Magic 2 LAN triple.
2.2.2Reading the PLC indicator light
The integrated PLC indicator light (LED) shows the
status of the devolo Magic 2 LAN triple with solid
or flashing light:
LED Behavior Meaning LED status display
(web interface*)
1 Red LED Lights up for
up to 2 sec.
Start-up process Cannot be disabled
2 Red LED Flashing at in-
tervals of 0.5
sec. (on/off)
Status 1:
Resetting the devolo Magic adapter was suc-
cessful. The PLC/reset button has been pres-
sed and held for 10 seconds.
Status 2:
The devolo Magic adapter has been
returned to its factory default settings. Since
the last reset, no pairing with another
devolo Magic adapter has taken place.
Connect the adapter with another
devolo Magic adapter to create a full-
fledged PLC network as described in
Chapter 3.3 Connecting the devolo Magic
adapters.
Cannot be disabled