Specifications

dLAN 200 AVmodule 6400
14
devolo AG
Charlottenburger Allee 60 Tel.: [phone] www.devolo.com
D-52068 Aachen Fax: [phone] [e-mail]
7.5 DC Characteristics
Parameter Test Conditions Min Max
Low-level
input voltage
0.8 V
High-level
input voltage
2.0V
Low-level
output voltage
I
OL
=4mA, 12mA
1
0.4 V
High-level
output voltage
I
OH
=-4mA, -
12mA
2
2.4V
Low-level
input current
V
I
=GND -1µA
High-level
input current
V
I
=VDD 1µA
High-
impedance
output current
GND ≤ V
I
≤ VDD -1µA 1µA
Table 15: DC characteristics
1) I
OL
= 12mA for status LEDs
I
OL
= 4mA for all other interfaces
2) I
OH
= -12mA for status LEDs
I
OH
= -4mA for all other interfaces
7.6 Mechanical Specifications
The dLAN 200 AVmodule 6400 is connected
via an industry standard header using 0.40mm
square pins on 0.127mm centers. For easy
insertion and removal of module devices a
mating female connector can be used.
Alternatively, the device may be soldered
directly to the host board.
The card dimensions including connector are:
• 69.5 x 32.64 x 8.8 mm
(dLAN 200 AVmodule 6400)
• 69.5 x 27.5 x 13.8 mm
(dLAN 200 AVmodule 6400 horizontal)
8 Revision History
Revision Modifications
1
• Original Issue
2
• Sample circuits updated with
fuse
• Current consumption
updated
3
• Pinout of ISODEF and
DUPLEX corrected
4
• minor
5
• Fig.: 9 updated
• GPIO / LED behaviour
changed
• Power Sequencing
Requirements
6
• Added: description of second
variant (horizontal mounting)
• Added description of
transient and overvoltage
protection in TX+/- path.
• Recommended Varistor
changed to 300Vac type
© 2009 devolo AG, Aachen (Germany)
While the information in this data sheet has been
compiled with great care, it may not be deemed an
assurance of product characteristics. devolo shall
be liable only to the degree specified in the terms of
sale and delivery.
devolo, dLAN
®
and the devolo logo are registered
trademarks of devolo AG.
Subject to change without notice. No liability for
technical errors or omissions.