User Manual
Table Of Contents
- devolo_Magic_2_LAN_triple.pdf
- Contents
- 1 Preface
- 2 Introduction
- 3 Initial use
- 4 Network configuration
- 5 Appendix
- Index
37 Network configuration
devolo Magic 2 LAN triple
4.6.9Reboot
To restart the devolo Magic 2 LAN triple, click the
Reboot button in the System area.
4.6.10Factory settings
The devolo Magic 2 LAN triple can be reset to its
original factory default settings.
1 To remove a devolo Magic adapter from your
devolo Magic network and successfully restore
its entire configuration to the factory default
settings, click Factory reset.
2 Wait until the LED flashes white and then dis-
connect the devolo Magic adapter from the
mains supply.
Doing so causes you to lose your custom PLC
settings. The last-assigned passwords for the
devolo Magic 2 LAN triple are also reset.