User Manual
Table Of Contents
- devolo_Magic_2_LAN_1-1.pdf
- Contents
- 1 Preface
- 2 Introduction
- 3 Initial use
- 4 Network configuration
- 5 Appendix
- Index
Appendix 38
devolo Magic 2 LAN1-1
5 Appendix
5.1 Technical specifications
5.2 Connection tips
To improve the transmission capacity of the net-
work, we recommend that you comply with the
following "connection rules":
b Plug the devolo Magic 2 LAN 1-1 directly into a
wall outlet. Avoid using power strips. This may
impair the transmission of the PLC signals.
b If there are several outlets in the wall directly
next to each other, they behave like a power
strip. Individual outlets are optimal.
Security 128 Bit AES
Device port 1x RJ45
(Gigabit Ethernet port)
Power consumption Maximum: 4.7 W
Typical: 4.0 W
Stand-by: 0.5 W
Power supply internal
110-250 V AC
50 Hz / 60 Hz
Temperature
(storage/operating) -25°C to 70 °C / 0°C to 40°C
-13°F to 158°F / 32°F to 104°F
Dimensions without
plug)
b 130 x 66 x 42
(HxWxD/mm)
b 5.12 x 2.6 x 1.65)
(HxWxD/inch)
Ambient conditions 10-90% Humidity,
non-condensing
Certifications FCC/IC
Fig. 2: connection tips