User Manual

35 Network configuration
devolo Magic 2 LAN 1-1
4.6.6Standby
If Standby mode is enabled, the
devolo Magic 2 LAN 1-1 automatically switches to
Standby mode if no Ethernet connection has been
enabled, i.e. if no network device (e.g. computer) is
switched on and connected to the network inter-
face and if Wi-Fi is disabled.
In this mode, the devolo Magic 2 LAN 1-1 is not
accessible over the Powerline network. As soon as
the network device (e.g. computer) connected to
the network interface is switched on again, your
adapter can also be accessed again over the
electrical wiring.
Standby mode is enabled in the
devolo Magic 2 LAN 1-1 factory default settings.
For information about the LED behavior of
the devolo Magic adapter in standby mode,
refer to Chapter 2.2.2 Reading the PLC in-
dicator light.
4.6.7Time server
Under Time server, you can select your current
time zone. The Time server (NTP) option lets you
specify a time server.
A time server is a server on the Internet whose task
consists of providing the exact time. Most time
servers are coupled with a radio clock.
The devolo Magic 2 LAN 1-1 automatically switch-
es between standard and daylight saving time.
4.6.8Firmware update
The firmware of the devolo Magic 2 LAN 1-1 inclu-
des the software for operating the device. As
necessary, for example to modify existing functi-
ons, devolo provides new versions on the Internet
as a downloadable file.