User Manual
Table Of Contents
- devolo_Magic_2_LAN_1-1.pdf
- Contents
- 1 Preface
- 2 Introduction
- 3 Initial use
- 4 Network configuration
- 5 Appendix
- Index
29 Network configuration
devolo Magic 2 LAN 1-1
4.3 Overview
The Overview area shows the status of the
devolo Magic 2 LAN 1-1 and the connected LAN
and PLC devices.
4.3.1System
Name: Device name
MT number: Device type number
Serial number: Device serial number
MAC address: MAC address of the device
Firmware version: Firmware version of the device
System uptime: Operating time since the last re-
start
4.3.2Powerline
Local device
Device state: status information “connected“ or
“not connected“
Network
Connected clients: number of devices connected
to the Powerline network
4.3.3LAN
Ethernet
LAN port: network port; if a connection has been
detected, the speed (10/100/1000 Mbps); other-
wise, the status "unconnected" is specified.
IPv4
Protocol: Display indicating whether DHCP is swit-
ched on or switched off
Address: IPv4 address in use
Subnet mask: IPv4 network mask in use
Default gateway: IPv4 gateway in use