User Manual

Initial use 22
devolo Magic 2 LAN1-1
3.3 Connecting the
devolo Magic 2 LAN 1-1
In the following sections we describe how to
connect the devolo Magic 2 LAN 1-1 and integrate
it into a network. We clarify the exact procedures
based on various possible network configurations.
For the permitted voltage range for opera-
ting the device and the power consumption,
refer to the type plate on the back of the de-
vice. For more technical information about
our products, refer to the product area at
www.devolo.com
.
3.3.1Starter Kit—Automatic setup for a
new devolo Magic PLC network
1 Connect one devolo Magic 2 LAN 1-1 to your
Internet access device's network port (e.g. your
Internet router) using the network cable inclu-
ded (Cat-5e UTP, not for in-wall use).
2 Connect the other devolo Magic 2 LAN 1-1 to
your computer‘s network port e. g. (or to ano-
ther device‘s network port) using the network
cable included (Cat-5e UTP, not for in-wall use).
3 Plug both devolo Magic adapters into available
electrical outlets within 3 minutes. When the
LEDs on both adapters flash white at regular
intervals of 0.5 sec., they are ready to operate
and automatically start the process of establis-
hing an encrypted connection to each other