User`s manual

User’s Manual Version 1.2
Devolinx Serial-Ethernet Server
STE-601C
Copyright © 2007 Aaxeon Technologies, Inc.
All rights reserved.
- 8 -
2. Nomenclature and Settings
2.1 Nomenclature of STE-601C Components
Figure 2.1 shows the names of STE-601C components. In the figure, the indicated switch settings represent
factory settings.
Figure 2.1. Nomenclature of STE-601C components.
2.2 MODE Switch
This sets or initializes the operating mode for the STE-601C. The factory default setting is that Switch 1
(SW1) and Switch 2 (SW2) are set to OFF. You can use the Mode switch to change the operating mode from
the factory default settings to your desired mode.
STE-601C can be setup either RS-232, RS-485, RS-422 or Console configuration mode by MODE Switch.
SW1 SW2 Mode
OFF RS-232 OFF
ON CONSOLE
OFF RS-485 ON
ON RS-422