User`s manual

User’s Manual Version 1.2

Devolinx Serial-Ethernet Server

STE-601C

- 25 -

COM1 Setup

1. Click on the “COM1” link and the following screen appears. Fill in COM1 parameter information under

COM1 field then click on “Save Configuration” button to save the changes.

LINK1 Setup

1. Click on the “COM1” link and the following screen appears, you can configure STE-601C as

transparent mode by default. Configure STE-601C as TCP server and the local port is 4660, IP filter is

disabled by default, if IP filter is enabled, only source IP 10.0.29.11 can connect to STE-601C.