User`s manual

User’s Manual Version 1.2

Devolinx Serial-Ethernet Server

STE-601C

- 10 -

Notes:

1. Arp command can only be used to set a static IP address of STE-601C using system default user name

admin and default password null.

2. Only TCP/IP packet with destination port number 1 will lead STE-601C to reboot and change the IP

address.

3.3 Auto IP

A DHCP server automatically assigns the IP address and network settings. STE-601C supports DHCP. It will

supply for the unit with an IP address gateway address, and subnet mask. You may use Monitor.exe

software to search network information automatically by putting a check on Auto IP on Dialog window.