User manual

Use of the speaker
This speaker is designed to perform in professional environments. Either speech, music, or any other type of
sound can be played trough this speaker.
The powered Flex-series are equipped with their own power amplifier, mounted on the rear of the speaker.
This module also houses the internal USB MP3-player, Bluetooth receiver, EQ and the several connectors +
volume controls. The built-in power amplifier is capable to produce enough power for the speaker alone. It is
not possible to attach a second passive speaker to the amplifier module of this speaker. It is however
possible to attach a second active speaker with the signal link-output.
The built-in MP3-player supports most USB-thumbdrives and SD cards. However, the results of some
models may vary as many manufacturers have their own standards. The display shows track information and
with the silver buttons you are able to browse through your files. The player has on-board controls for the
mode, play/pause, stop, repeat, previous and next features. It is also possible to use the included wireless
remote control to operate the MP3-player.
Make sure you connect the right audio sources to the right inputs. The mic input is suitable for most
microphones, but does not supply phantom power, if your microphone requires that. The line input is suitable
for RCA-sources (MP3-players, laptops, smartphones, tablets) and can also be used with an adapter cable
to a 3.5mm jack (not included). A XLR-connector is provided for professional audio sources, such as DJ or
PA mixers, electronic keyboards and so on. The line output is used to connect a second speaker, such as
another Flex series speaker. Connections are available in XLR and 6.35mm jack.
This speaker comes with two monitor stands, which makes horizontal positioning possible. This feature is
often used when the speaker needs to perform as a floor monitor for artists.
Mount the monitor stands as illustrated, further on this page.
This speaker is also equipped with a lockable 35mm stand adapter, which makes it possible to place the
speaker on a suitable height. This makes the distribution of high and mid-frequencies easier. See the image
above for details. The lockable screw-knob positions the speaker firmly on your speaker stand, thus
preventing any type of resonance.
Warranty is void when damage to this speaker is caused by improper use. When any damage to this speaker
occurs, please contact your local dealer for help.
Any information and illustrations shown in this user manual are subject to change without further notice.
User manual version: 2.0 Creation date + author initials: 22-04-2013 RV Revision date + author initials: 25-02-2014 RV