Specifications

ManualsBrandsDeVillbiss Air Power Company ManualsAir Compressor38301-9615

STEEL DRIVER SERIES

Operation, Maintenance, and Parts Manual for NCS2

MEDIUM DUTY STAPLER

Specifications

DeVilbiss Air Power Company • 213 Industrial Drive • Jackson, TN 38301-9615

MGP-NCS2-1A 9/25/97

MODEL .................................................... NCS2

AIR INLET ....................................................... 1/4" NPT

WEIGHT .......................................................... 2 lbs. 8 ozs.

LENGTH.......................................................... 9.5"

HEIGHT ........................................................... 7"

MAXIMUM PRESSURE.................................. 125 PSI

PRESSURE RANGE ....................................... 65-100 PSI

FASTENER LENGTH ...................................... 1/2" - 1"

CROWN SIZE ................................................. 1/4"

MAGAZINE CAPACITY .................................. 100 Staples

SCFM REQUIRED @ 90 PSI .......................... Every 10 Fasteners

Delivered Per Minute

Requires .25 SCFM

MINIMUM COMPRESSOR HP

REQUIRED TO OPERATE .............................. 3/4 HP

(TANK MOUNTED)

This manual contains information that is important for you to know and under-

stand. This information relates to protecting YOUR SAFETY and PREVENTING

EQUIPMENT PROBLEMS. PLEASE READ THIS MANUAL.

Summary of content (16 pages)

PAGE 1
STEEL DRIVER SERIES Operation, Maintenance, and Parts Manual for NCS2 MEDIUM DUTY STAPLER Specifications MODEL .................................................... NCS2 AIR INLET ....................................................... 1/4" NPT WEIGHT .......................................................... 2 lbs. 8 ozs. LENGTH .......................................................... 9.5" HEIGHT ........................................................... 7" MAXIMUM PRESSURE .............................
PAGE 2
TABLE OF CONTENTS PAGE Tool Specifications ....................................................................................... Front Cover Table of Contents ......................................................................................................... 2 Limited Warranty .......................................................................................................... 3 Safety Guidelines ..................................................................................................
PAGE 3
LIMITED WARRANTY ONE YEAR FROM DATE OF PURCHASE All merchandise manufactured by DeVilbiss Air Power Company is warranted to be free of defects in workmanship and material which occur during the first year from the date of purchase by the original purchaser (initial user). Products covered under this warranty include: air compressors, *air tools, accessories, service parts, pressure washers, and generators used in consumer applications (i.e., personal residential household usage only).
PAGE 4
SAFETY GUIDELINES - DEFINITIONS This manual contains information that is important for you to know and understand. This information relates to protecting YOUR SAFETY and PREVENTING EQUIPMENT PROBLEMS. To help you recognize this information, we use symbols to the right. Please read the manual and pay attention to these sections. URGENT SAFETY INFORMATION - A HAZARD THAT WILL CAUSE SERIOUS INJURY OR LOSS OF LIFE. IMPORTANT SAFETY INFORMATION - A HAZARD THAT MIGHT CAUSE SERIOUS INJURY OR LOSS OF LIFE.
PAGE 5
SAFETY GUIDELINES DANGER Read these warnings carefully. Failure to follow warnings will result in severe injury or death! Risk of head injury. HAZARD TO LOOK FOR Injury to eyes, head and hearing WHAT COULD HAPPEN HOW TO PREVENT IT Metal fragments, fasteners, or other material could be projected against head or into eyes. Continued exposure to an operating tool can result in permanent hearing damage. Always wear ANSI approved Z87 safety glasses, Z89.1 head protection and S3.19 hearing protection.
PAGE 6
SAFETY GUIDELINES Risk of puncture injury. HAZARD TO LOOK FOR Connecting and Disconnecting Air Hose WHAT COULD HAPPEN HOW TO PREVENT IT Accidental discharge of a fastener can occur. Hold tool by the handle and keep trigger and contact trip safety mechanism from contacting objects or parts of the body when connecting or disconnecting air supply. Disconnect air hose before loading fasteners, removing a jammed fastener, servicing the tool, or moving the tool to another work area.
PAGE 7
LUBRICATION AND MAINTENANCE NOTE Many air tool users find it convenient to use an Oiler to help provide oil circulation through tool. An Oiler also increases the efficiency and useful life of the tool. An oiler is recommended for tools that receive heavy or constant use. Check oil level in the oiler daily. (See Figure 2) Do not store the tool in cold weather. Frost or ice can form on the operating valves or mechanisms and the tool may not operate correctly.
PAGE 8
LUBRICATION AND MAINTENANCE Always connect the Female Quick Coupler to the air hose. Never connect the Female Quick Coupler to the tool. Do not use any type of flammable gases or oxygen as a power source for the tool. Use filtered, lubricated, regulated compressed air only. Use of compressed gas instead of compressed air may cause the tool to explode and cause death or serious personal injury. Do not use a check valve or any other fittings which will allow air to remain in the tool.
PAGE 9
CONTACT TRIP SAFETY MECHANISM 3. The trigger is released after each fastener is driven. 4. Move the tool to the next desired fastener location and repeat the procedure above. CHECKING THE OPERATION OF CONTACT TRIP SAFETY MECHANISM Never keep the trigger pulled on contact trip tools when carrying or holding the tool. Death or a serious puncture wound could occur if the contact trip bumps something or someone. Check the operation of the contact trip safety mechanism often.
PAGE 10
LOADING THE TOOL Disconnect tool from air supply before adjusting, clearing jams, servicing, relocating and during nonoperation. Handle the tool carefully, respect the tool as a working implement and always assume the tool contains fasteners: a. Never use the tool as a toy and engage in horseplay. b. Never aim or point the tool at anyone. The tool may contain fasteners. c. Always keep people and animals at a safe distance from the work area in case of accidental discharge of fasteners. d.
PAGE 11
OPERATING THE TOOL 1. Add one drop of Air Tool Oil, high speed spindle oil, such as Unocal RX22, or 3-in1 oil into the air inlet. 5. Load fasteners into your tool following the instruction in this manual. 2. Attach a Quick Connect Fitting to the tool. 6. Reconnect the air hose to the tool. 3. Connect the Tool to an air compressor using a 3/8" I.D. hose. (The magazine must be empty of all fasteners). Make sure the hose has a rated working pressure exceeding 150 PSI and a Female Quick Coupler. 7.
PAGE 12
TROUBLESHOOTING GUIDE Stop using the tool immediately if any of the following occur. Serious personal injury could occur. Warranty repairs or replacements must be performed by a DeVilbiss Air Power Authorized Service Center Only. PROBLEM CAUSE SOLUTION Air leaking at trigger valve area. Seals in trigger valve housing are damaged. Seals must be replaced & operation of Contact trip must be checked. (NSK-019) Air leaking between housing and exhaust deflector. Loosen exhaust deflector screws.
PAGE 13
EXPLODED VIEW 13
PAGE 14
PARTS LIST KEY NO. 1 2 3 * 4 * 5 6 * 7 * 8 9 * 10 * 11 12 +13 +14 +15 #16 17 #18 19 20 21 +#22 23 25 26 27 28 29 4 4 4 4 4 4 PART NUMBER DESCRIPTION NSP-154 NSP-182 NSP-074 --------NSP-077 --------NSP-079 --------NSP-082 ----------------NSP-085 --------NSP-088 ------------NSP-072 --------NSP-071 NSP-092 Screw Washer Exhaust Deflector Spring Seal Cylinder Cap Assy. Seal Seal Firing Valve Assy. Seal Seal Collar Seal Main Piston Driver (Regular) Seal Cylinder Sleeve Assy.
PAGE 15
FASTENERS Fastener Part # 2L16 2L19 2L25 Length Shank Gauge Shank Type Crown or Head Type Collation Finish QTY Per Box 5/8" 3/4" 1" 18 GA 18 GA 18 GA - 1/4" 1/4" 1/4" Adhesive Adhesive Adhesive Galvanized Galvanized Galvanized 5,000 5,000 5,000 INTERCHANGE INFORMATION The DeVilbiss Medium Duty Stapler NCS2, will accept Fasteners for: Bostitch Senco Duofast Hitachi Fasco Atro BEA Haubold TA52 LN4450, SKS KN1848 N3804A 90 - 40 90 - 40 190-25-103, 90/3-150 PN6040A These Fasteners should be th
PAGE 16
Retain the original sales receipts as proof of purchase for warranty repair work. STEEL DRIVER SERIES Attach sales receipt here. Operating, Maintenance and Parts Manual for NCS2 Medium Duty Stapler Call our Toll Free Number 1-800-888-2468, Ext 2, then 1, to obtain the location of the nearest Authorized Service Center for ordering repair parts and for warranty repairs.