Operator`s manual

9- ENG
D25617
OPERATING INSTRUCTIONS
BASIC ELEMENTS OF A PRESSURE WASHER
High Pressure Pump (located inside the shroud): Increases the pressure of the
water supply.
Engine: Drives the high pressure pump.
High Pressure Hose: Carries the pressurized water from the pump to the gun
and wand.
Spray Gun: Connects with wand to control water flow rate, direction, and pres-
sure.
Multi-Reg Wand: Has a spray nozzle which adjust from a pencil stream (0°) to a
wide angle fan spray (40°). The spray can be adjusted by twisting the nozzle
clockwise and/or counterclockwise. Also, the high and low pressure settings can
be controlled by moving the nozzle in and out. See Operation section.
Chemical Hose: Allows cleaners or cleaning solvents to be mixed with the pres-
surized water stream. See How To Siphon Chemicals/Cleaning Solvents in
Operation section of this manual.
READ THIS OWNER’S MANUAL AND SAFETY RULES BEFORE OPERATING
YOUR UNIT. Compare the illustrations with your unit to familiarize yourself with
the location of various controls and adjustments. Save this manual for future ref-
erence.
Engine
High
Pressure
Hose
Spray
Gun
Multi-Reg
Wand
Chemical
Hose
High
Pressure
Pump