Instruction manual

- 26 -
Appendixes
Problem: Uneven color or color too dark
 Use OSD “Picture” function to adjust color setting.
(please refer to page 16 for CVBS1/CVBS2 input or page 17 for VGA input).
Problem: White color is not white
 Check “Color temp” is correct (for VGA input).
 Use OSD “Color Adjust” function to adjust color temperature (page 18).
 Use OSD “Hue” function to adjust color setting (for CVBS input, page 16).
Problem: Can not adjust LCD monitor with buttons in the front.
 Make sure the LCD Power is ON and the connections are correct.
 Turn-off and on then reset the LCD.
If the LCD doesn’t respond as the keys are pressed, please contact the service
representatives for further information.