Instruction manual

- 21 -
Mounting Guide
Rack Mounting
1 Line up the 3 mounting guides
on each side of the monitor with
appropriate holes in the rack
2 Insert and slightly tighten rack mounting
screws on the upper mounting guides on
each side
3 Place the monitor into the rack and be
hooked
on the installed rack mounting screws
(use the larger holes on both sides of the
bracket).
Tighten two mounting screws on each
bracket.
4 Insert and tighten the rest rack mounting screws.
Use screws applicable to the rack system in use.
Failure to observe this may result in serious injury.
If there is any doubt of the suitability of a mount or
fixing method, a suitably qualified technician should
be consulted.