Instruction manual

- 20 -
OSD Architecture
General Setup
Power On Default [ CVBS 1 ]
Language
[
En
g
lish
]
OSD Timeout 10
Reset ▼▲
Exit OSD ▼▲
Setup CVBS1
Press Enter Key and the OSD MENU pop up.
Press Arrow Down or Arrow Up Key to move cursor to
then press Enter to access the General Setup.
Move Arrow Down or Arrow Up Key to adjust the values of each selection.
Press Enter key to confirm the change and move to the next selection.
Press Enter key to “Exit OSD” and press Arrow Down or Arrow Up Key to
Exit the OSD MENU.
 Power On Default: Set the signal input priority at power ON.
CVBS1: Set channel to CVBS1 when power is turned ON.
CVBS2: Set channel to CVBS2 when power is turned ON.
VGA: Set channel to VGA when power is turned ON.
OFF: Disable the signal input priority function.
 Language: Allow user to select the OSD menu Languages.
Select from English, German, French, Spanish, Italian, Simplified
Chinese or Japanese.
 OSD Timeout: Set the OSD display time from [5] to [60] seconds.
 Reset: Reset the monitor to the original factory settings.
Press Arrow Down or Arrow Up Key to activate the reset function.
 Exit OSD: Exit OSD Menu.
Press Arrow Down or Arrow Up Key to exit OSD menu.