Instruction manual

- 17 -
OSD Architecture
VGA Setup (Picture)
Brightness 50
Contrast 50
Back Light
[
Stron
g
]
Color temp. [ Cool ]
Color Adjust ▼▲
Exit OSD ▼▲
Picture VGA
Press Enter Key and the OSD MENU pop up.
Press Arrow Down or Arrow Up Key to move cursor to
then press Enter to access the VGA Setup.
Move Arrow Down and Arrow Up Key to adjust the values of each selection.
Press Enter key to confirm the change and move to the next selection.
Press Enter key to “Exit OSD” and press Arrow Down or Arrow Up Key to
Exit the OSD MENU.
 Brightness: Adjust the overall picture shade and brightness.
 Contrast: Permits adjustment for contrast between light or dark areas of the
picture.
 Backlight: This feature is designate to directly adjust the backlight levels of
LCD panel in case the unnecessary light condition should hinder
the viewing of the images.
Press Arrow Down or Arrow Up Key to adjust.
(i.e. the LCD monitor is installed on a strong-lighted office or
surveillance center). [Strong]or [Weak] selectable.