Instruction manual

- 12 -
Operating Instructions Control
Power
Monitor ON / OFF. At OFF mode, monitor will be in standby status.
Light indicates:
Green – Power On
Red – Standby mode.
No light – Power Off
MENU/ENTER (Menu Select)
Press to enter OSD menu.
When OSD menu is active, press to access the items in the menu.
As the adjustment complete, press again to confirm the adjustment then
move downward to the next selection.
Adjust UP (Input Source/ Value Adjust Key)
When OSD menu is non-active, select the next input from CVBS1,
CVBS2, and VGA.
When OSD menu is active, select the item above or increment the
current value.
Adjust Down (Input Source/ Value Adjust)
When OSD menu is non-active, select the previous input from CVBS1,
CVBS2, and VGA.
When OSD menu is active, select the item below or decrement the
current value.