0.4” Dual Rack Mount TFT-LCD Monitor INSTRUCTION MANUAL Please read this manual thoroughly before use. Keep it handy for future reference. Document Number: V531-LD100-000 Ver.
* * * WARNING * * * This equipment has been tested and found to comply with the Class A digital device‚ pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and uses in accordance with the instruction manual, may cause harmful interference to radio communication.
Precautions Safety Should any liquid or solid object fall into the cabinet, unplug the unit and have it checked by the qualified personnel before operating it further. Installation Do not install the unit in an extremely hot or humid place or in a place subject to excessive dust or mechanical vibration. The unit is not designed to be waterproof. Exposure to rain or water may damage the unit. Unplug the unit from the wall outlet if it is not going to be used for several days or more.
FCC COMPLIANCE STATEMENT INFORMATION TO THE USER: THIS EQUIPMENT HAS BEEN TESTED AND FOUND TO COMPLY WITH THE LIMITS FOR A CLASS B DIGITAL DEVICE, PURSUANT TO PART 15 OF THE FCC RULES. THESE LIMITS ARE DESIGNED TO PROVIDE REASONABLE PROTECTION AGAINST HARMFUL INTERFERENCE IN A RESIDENTIAL INSTALLATION. THIS EQUIPMENT GENERATES, USES AND CAN RADIATE RADIO FREQUENCY ENERGY AND, IF NOT INSTALLED AND USED IN ACCORDANCE WITH THE INSTRUCTIONS, MAY CAUSE HARMFUL INTERFERENCE TO RADIO COMMUNICATIONS.
Important Safeguards 1. READ INSTRUCTIONS -- All the safety and operating instructions should be read before the appliance is operated. 8. POWER SOURCES – The Video monitor or equipment should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supplied to your home, consult your video monitor or equipment dealer or local power company.
Important Safeguards 14. OBJECT AND LIQUID ENTRY -Never push objects of any kind into video monitor or equipment through openings as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind on the product. 17. SAFETY CHECK -- Upon completion of any service or repairs to this video product, ask the service technician to perform safety checks to determine that the video product is in proper operating condition. 18.
Installation Guide Accessory All of the accessories have been tested and qualified. Do not use any non-qualified accessories with this LCD monitor. Please check all accessories before installation LCD monitor. For USA: AC power cord x 1 10.
Contents ……………………………………………………2 ……………………………………………………3 FCC Compliance Statement ……………………………………4 Important Safeguards …………………………………………5 Installation Guide ………………………………………………7 Contents ……………………………………………………8 Quick installation ………………………………………………9 Features ……………………………………………………10 Resolution Support …………………………………………11 Operating Instructions Controls ……………………………………12 Backside Connections …………………………………………13 OSD Architecture ………………………………………………14 A. OSD Tree CVBS ..……………………………………………14 B.
Quick Installation when using with a PC For instructions on rack mounting, see page 18 of this user guide. 1 Connect power cord 2 Connect video cable • Make sure both the LCD display and computer are turned OFF • Connect the video cable from the LCD display to the computer. 3 Turn ON LCD display and computer • Turn ON the LCD display, then turn ON the computer. This sequence (LCD display before computer) is important.
Features General 10.4” (800 x RGB x 600) TFT LCD Panel. Advanced control OSD menu. Brightness of 220 cd/m² High contrast of 400 : 1 PC 1 analog RGB signal input. Compatible with SVGA (800 x 600) resolution. Support vertical refresh rate up to 75 Hz for VESA standard specification. Automatic or manual optimum detection of separate sync and composite sync of VGA signal. VGA screen horizontal / vertical position and width adjustment.
Resolution Support VGA resolution table Resolution Symbol H Freq. V Freq. Pixel Remark 640 x 480 640-60 31.469 59.941 25.175 VESA 640 x 480 640-72 37.861 72.810 31.500 VESA 640 x 480 640-75 37.500 75.000 31.500 VESA 800 x 600 800-56 35.156 56.250 36.000 VESA 800 x 600 800-60 37.879 60.317 40.000 VESA 800 x 600 800-72 48.077 72.188 50.000 VESA 800 x 600 800-75 46.875 75.000 49.
Operating Instructions Control Power Monitor ON / OFF. At OFF mode, monitor will be in standby status. Light indicates: Green – Power On Red – Standby mode. No light – Power Off MENU/ENTER (Menu Select) Press to enter OSD menu. When OSD menu is active, press to access the items in the menu. As the adjustment complete, press again to confirm the adjustment then move downward to the next selection.
Backside Connections 1 DC POWER IN: DC12V power input. ○ 2 RIGHT MONITOR CVBS2 IN: composite video signal input for ○ CVBS2 channel. 3 RIGHT MONITOR CVBS2 OUT: Video auto termination loop-out for ○ CVBS2 IN signal. Auto termination impedances are 75 Ohms. 4 RIGHT MONITOR CVBS1 IN: composite video signal input for ○ CVBS1 channel. 5 RIGHT MONITOR CVBS1 OUT: Video auto termination loop-out for ○ CVBS1 IN signal. Auto termination impedances are 75 Ohms.
OSD Architecture OSD Menu Tree CVBS - 14 -
OSD Architecture OSD Menu Tree VGA - 15 -
OSD Architecture CVBS Setup (Picture) Brightness 50 Contrast 50 Saturation 60 50 Hue Sharpness 0 Back Light [ Strong ] ▼▲ Exit OSD Picture CVBS1 Press Enter Key and the OSD MENU pop up. Press Arrow Down or Arrow Up Key to move cursor to then press Enter to access the CVBS Setup. Move Arrow Down and Arrow Up Key to adjust the values of each selection. Press Enter key to confirm the change and move to the next selection.
OSD Architecture VGA Setup (Picture) Brightness 50 Contrast 50 Back Light [ Strong ] [ Cool ] Color temp. ▼▲ ▼▲ Color Adjust Exit OSD Picture VGA Press Enter Key and the OSD MENU pop up. Press Arrow Down or Arrow Up Key to move cursor to then press Enter to access the VGA Setup. Move Arrow Down and Arrow Up Key to adjust the values of each selection. Press Enter key to confirm the change and move to the next selection.
OSD Architecture VGA Setup Brightness 50 Contrast 50 Back Light [ Strong ] [ User ] Color Temp. ▼▲ ▼▲ Color Adjust Exit OSD Picture VGA Color Temp.: Select color temperature presets of [ Cool ], [ Warm ] , or [ User ] for User-Define setting. Color Adjust: This function is available only when color temperature function is selected to User-Define setting [ User ]. Press Arrow Down or Arrow Up Key to enter the sub menu. Move Arrow Down or Arrow Up Key to adjust the values of each selection.
OSD Architecture VGA Setup Auto Adjust ▼▲ H. Position 50 V. Position 50 50 Clock Phase 71 ▼▲ Exit OSD Picture VGA Press Enter Key and the OSD MENU pop up. Press Arrow Down or Arrow Up Key to move cursor to then press Enter to access the VGA Setup. Move Arrow Down and Arrow Up Key to adjust the values of each selection. Press Enter key to confirm the change and move to the next selection. Press Enter key to “Exit OSD” and press Arrow Down or Arrow Up Key to Exit the OSD MENU.
OSD Architecture General Setup Power On Default [ CVBS 1 ] Language [ English ] 10 OSD Timeout ▼▲ ▼▲ Reset Exit OSD Setup CVBS1 Press Enter Key and the OSD MENU pop up. Press Arrow Down or Arrow Up Key to move cursor to then press Enter to access the General Setup. Move Arrow Down or Arrow Up Key to adjust the values of each selection. Press Enter key to confirm the change and move to the next selection. Press Enter key to “Exit OSD” and press Arrow Down or Arrow Up Key to Exit the OSD MENU.
Mounting Guide Rack Mounting 1 Line up the 3 mounting guides on each side of the monitor with appropriate holes in the rack 2 Insert and slightly tighten rack mounting screws on the upper mounting guides on each side 3 Place the monitor into the rack and be hooked on the installed rack mounting screws (use the larger holes on both sides of the bracket). Tighten two mounting screws on each bracket. 4 Insert and tighten the rest rack mounting screws. Use screws applicable to the rack system in use.
Typical Device Connections - 22 -
Dimensions - 23 -
Specification LCD Size Pixel Type Max. Resolution Aspect Ratio 10.4" Normal white 800 x RGB x 600 4:3 640 x 480 @ 60/72/75 800 x 600 @ 56/60/72/75 Resolution / Scan for VGA Viewing Area Pixel Pitch Brightness Contrast Ratio Type Hours Backlight Type Viewing Angle (H/V) Display Color Response Time Sync. Format Frequency (Horizontal) Frequency (Vertical) Input Interfaces Video Interface VGA (H) x (V) 0.264 x 0.264 mm 220 cd/m2 400:1 1CCFL 20,000 hr(Typ) 110/80 262K colors 40ms(tr+tf) NTSC / PAL PC: 31.
Appendixes Check the information in this section to see if the problems can be solved before requesting repair: The consumers are only allowed to solve the problems described as below. Any unauthorized product modification, or failure to follow instructions supplied with the product will void the warranty immediately. Problem: No Power indicates Make sure power cord is correct. Make sure the voltage output is correct. DC12V at 5amps. Problem: No image Make sure power button is ON.
Appendixes Problem: Uneven color or color too dark Use OSD “Picture” function to adjust color setting. (please refer to page 16 for CVBS1/CVBS2 input or page 17 for VGA input). Problem: White color is not white Check “Color temp” is correct (for VGA input). Use OSD “Color Adjust” function to adjust color temperature (page 18). Use OSD “Hue” function to adjust color setting (for CVBS input, page 16). Problem: Can not adjust LCD monitor with buttons in the front.
Memo - 27 -
