User's Manual

7/7/2017 Page 2(8)
Device Solutions Inc
Proprietary & Confidential
http://www.device-solutions.com/
Phone/Fax: [phone]
3 Other Recommendations
1. The PA0053 board shall be installed in such a way as to maximize clearance around the antenna.
4 Example Host Product Assembly Instructions
4.1 Screw PCB to enclosure
- #4-20 3/10 inch T10 Screws (HW0016)
- PA0053 PCB, Qty. = 1
Be sure to label the PA0053 PCB with the PA level number sticker.
Using four #4 screws that are 3/10 inch long T10 screws, secure the PA0053 PCB to the lower four screw
mounts in the enclosure (shown below). The PCB should be placed in the enclosure with the wire gland
pointing to the right and the PCB antenna pointed north (shown below). Be sure to tighten the screws so
that the PCB cannot move freely.